3. Keep the plug dry, and take appropriate care when operating in wet conditions. 4. Never use Beam if any part is broken, worn, cracked, open or shows any signs of being damaged. Contact your reseller immediately if you are uncertain if it is safe to use your Beam.
5. Not for use by children. 6. Handle Beam with care, do not drop it, and never bend it or give it a hard tug. To start charging Connect Beam to a type 2 socket on a charging station. Make sure this step is always carried out first.
Storage If Beam is stored for a prolonged period, keep it in a cool, dark place. 2. Check and ensure that no damage has occurred the first time you use the cable after transport. General instructions Read all the instructions before using Beam.
3. Prevent foreign bodies or materials from entering Beam’s connectors. 4. Avoid stepping on, driving over or placing heavy objects on Beam. Troubleshooting If charging does not start, carry out the following steps: Make sure Beam is connected correctly to the charging station’s charging socket.
Charge Amps AB reserves all rights to this document, as well as the information and illustrations therein. It is strictly forbidden to – in whole or in part – copy, adapt or translate the information without prior written permission from Charge Amps AB.