Nam Selection; System Select - Casio GZONE TYPE-S Manual

2. Enter the four-digit lock code and press Center Select
Key for [OK].
NOTE
The default Lock Code is the last 4 digits of your mobile
telephone number.
3. Press Reset Default.
4. Press Center Select Key
following warning message, the confirmation message
is displayed : Preference Settings Will be set to
factory defaults. Press Center Select Key
to continue.
5. Press Navigation Key
and press Center Select Key
A confirmation message is displayed briefly before the
phone resets itself.

6.5 System Select

Allows you to set your phone to search or roam for
another network when you are not in your home area.
Leave this setting as the default unless you want to alter
system selection as instructed by your service provider.
1. Press Center Select Key
Key right 2 times,
G'zOne TYPE-S
for [OK] after reading the
for [OK]
up or down to select Revert
for [OK].
for [MENU], Navigation
Phone Settings,
128
SETTINGS & TOOLS
System Select.
2. Press Navigation Key
the following setting, then press Center Select Key
for [OK].
• Home Only: Only within your home area or home
affiliated area.
• Automatic: Scan the radio channels based on the
Automatic setting.

6.6 NAM Selection

To select the phone's NAM (Number Assignment
Module) if the phone is registered with multiple service
providers:
1. Press Center Select Key
Key right 2 times,
NAM Selection.
2. Press Navigation Key
the following setting, then press Center Select Key
for [OK].
NAM1 / NAM2
A confirmation message is displayed briefly before the
phone resets itself.
G'zOne TYPE-S
up or down to select one of
for [MENU], Navigation
Phone Settings,
up or down to select one of
129