System Select; Nam Selection - Casio GZONE TYPE-S PTT Manual

Select Key [OK].
NOTE
The default Lock Code is the last 4 digits of your mobile
telephone number.
3. Press Reset Default.
4. Press Center Select Key
following warning message, the confirmation message
appears : Preference Settings Will be set to factory
defaults. Press Center Select Key
continue.
5. Press Navigation Key
Revert, then press Center Select Key
A confirmation message appears before the phone
resets itself.

6.5 System Select

Allows you to set your phone to search or roam for
another network when you are not in your home area.
Leave this setting as the default unless you want to alter
system selection as instructed by your service provider.
1. Press Center Select Key
right twice for SETTING & TOOLS,
G'zOne TYPE-S
[OK] after reading the
[OK] to
up or down to select
[OK].
[MENU],Navigation Key
150
SETTINGS & TOOLS
Phone Settings,
2. Press Navigation Key
of the following setting, then press Center Select Key
[OK].
• Home Only: Only within your home area or home
affiliated area.
• Automatic: Scan the radio channels based on the
Automatic setting.
NOTE
If you select the PTT Mode On, you cannot change this
setting.

6.6 NAM Selection

To select the phone's NAM (Number Assignment
Module) if the phone is registered with multiple service
providers:
1. Press Center Select Key
right twice for SETTING & TOOLS,
Phone Settings,
2. Press Navigation Key
of the following setting, then press Center Select Key
G'zOne TYPE-S
System Select.
up or down to select one
[MENU],Navigation Key
NAM Selection.
up or down to select one
151