Technical Data; Electrical Requirements - Truper PRE-1/3S Manual

Minimum water flow at the inlet
WARNING
If the power cable is damaged, it must be replaced by the manufacturer or an Authorized TRUPER
Service Center to prevent any risk of electric shock or significant accidents. The electrical insulation of
this tool is altered by splashes or spillage of liquids during its operation. Do not expose it to rain,
liquids, and/or moisture.
Before accessing the terminals, all power circuits must be disconnected.
WARNING
WARNING
CAUTION
WARNING
WARNING
The power cable has cable ties type: Y
The construction class of the tool is: Basic insulation
The thermal insulation class of the motor windings: Class H
2 L/min