Creating Drivers And Applications Recovery Discs - Gateway Profile Profile 6 User Manual

www.gateway.com

Creating drivers and applications recovery discs

Important
If you are recording to CDs, make sure
that they are CD-R and not CD-RW discs.
If you are recording to a DVD, make sure
that it is a DVD-R or DVD+R disc, not
DVD-RW or DVD+RW discs.
Start All Programs
Recovery Create My Drivers-
Applications CD(s) Burn ISO
You can use drivers and applications recovery discs to restore device drivers or
programs. You can create an unlimited number of drivers and applications
recovery disc sets. Before you continue, make sure that your computer has a
recordable drive. If your computer does not have a recordable drive, see
"Copying drivers and applications recovery files to a network" on page
To record a set of drivers and applications recovery discs:
Make sure that you have blank discs ready. Depending on the type of
Shortcut 1
System
recordable drive your computer has, you need either several CD-R discs
or one DVD-R or DVD+R disc.
Start
Creation
Click Start, All Programs, System Recovery,
2
then click Create My Drivers-Applications
CD(s). A message asks you if you want to
"Burn ISO" (record recovery discs) or "Create
ISO" (copy the files to a drive).
Click Burn ISO. The Recovery CD/DVD Creator
3
dialog box opens.
Click Start Creation. A message tells you
4
the number of blank discs that are
required for the recovery disc set.
Click the type of recordable disc you
5
want to use.
Make sure that you have the appropriate
6
number and type of blank discs, then
insert a blank disc into the recordable
drive.
Creating recovery discs
119.
117