Gateway FX540 Reference Manual page 69

www.gateway.com
6
Slide the new fan into the fan mount.
Caution
Be careful not to catch the wires connecting the power button to
the system board when rotating the fan mount. A notch has been
provided for routing these wires.
7
Insert the tabs on the rear of the fan mount into the slots
provided, then rotate the mount into place. The mount
should lock into place.
8
Reconnect the fan cable to the system board.
9
Replace the fan cover.
10
Replace the side panel by following the instructions in
"Replacing the side panel" on page 52.
63