Power On By RTC
[Disabled]
[Single event] Allows you to generate a single wake event.
[Daily event]
[Weekly event] Allows you to generate a weekly wake event.
[Monthly event] Allows you to generate a monthly wake event.
3.3.13
EZ-Flash
Enter Ez-Flash mode
This item allows you to run EzFlash utility. When you press <Enter>, a confirmation
message appears. Use the left/right arrow key to select between [Yes] or [No],
then press <Enter> to confirm your choice.
3.3.14
Watchdog Timer
Watchdog Support
This item allows you to enable or disable Watchdog timer. Configuration options:
[Enabled] [Disabled]
The following items appear when you set Watchdog Support to [Enabled].
Watchdog Count mode
Allows you to select Watchdog Timer I count mode.
Configuration options: [Second Mode] [Minute Mode]
Watchdog Timer
Use the <+> and <-> keys to adjust the value or input the desired value directly.
The value ranges from 1 to 255.
3.4
Hardware Monitor menu
The items in this menu provide you an overview of system status including
temperature, fan speed and voltage, and allow you to configure the smart fan.
Smart Fan Mode
Allows you to select the smart fan mode. Configuration options: [Disabled] [Normal]
[Manual Mode]
The following item appears only when you set Smart Fan Mode to [Manual
Mode].
3-10
Disables RTC to generate a wake event.
Allows you to generate a daily wake event.
H610T-EM-A
Need help?
Do you have a question about the H610T-EM-A and is the answer not in the manual?