Traffic Information; Connecting The Traffic Module; Viewing Traffic Events - Kenwood KNA-G510 Instruction Manual

Using an optional FM Traffic Receiver or XM Smart
Antenna, the navigation system can receive and use
traffic information. When a traffic message is received,
you can see the event on the map and change your route
to avoid the traffic incident.
For more information about the FM Traffic Receiver
or XM Smart Antenna, visit the Garmin Web site
(www.garmin.com). For participating FM subscription
providers and covered cities, refer to
.com/fmtraffic. For coverage cities for XM NavTraffic,
see http://www.xmnavtraffic.com
Note: This section uses "Traffic Module" to describe the
external device that receives traffic information. The FM
Traffic Receiver (such as the GTM 10) or the XM Smart
Antenna (such as the GXM 30) can be used.
KNA-G510 Instruction Manual
T i
raffiC nforMaTion

Connecting the Traffic Module

Make sure the traffic module is connected to the
KNA-G510. Refer to the Installation Guide for more
information.

Viewing Traffic Events

From the Menu page, touch
an item in the Traffic Events list to view the details.
Touch
http://www.garmin
Color
Near... to view traffic at a different location.
Traffic symbol
code
Traffic Events List
t i
raffic nforMation
Tools > Traffic Info. Select
Traffic
source
(FM
XM) and
signal
strength
EN-
or