Route; Saving.the.active.route; Navigating.a.saved.route; Recalculating.the.route - Kenwood KNA-G510 Instruction Manual

Saving the Active Route
From the Menu page, touch
Routes Save Active

Route.

>
Navigating a Saved Route
From the Menu page, touch
Routes > Navigate Saved
you want to navigate.
Recalculating the Route
From the Menu page, touch
Routes > Recalculate Route.
Deleting All Saved Routes
From the Menu page, touch
Routes > > Delete All Saved
Stopping Your Route
From the Menu page, touch Stop. Then touch Yes.
KNA-G510 Instruction Manual
Tools My Data
> >
Tools My Data
> >
Route. Touch the route
Tools > My Data >
Tools > My Data >
Routes.
Adding a Detour to a Route
If you need to take a detour from your current route,
open the Menu page and touch Detour.
1/2 mile, 2 miles, or 5 miles—select the distance of
the detour. For example if a road sign indicates that the
street is closed for the next 2 miles, touch
list. The navigation system recalculates your route for
the next 2 miles.
Detour by Road(s) In Route—select roads in your route
to avoid. For example, if the highway ramp is closed,
select the ramp in the list of roads. The navigation
system recalculates your route to avoid that ramp.
Detour by Traffic Event on
FM Traffic Receiver or XM NavTraffic, you can detour
around traffic events.
Remove All Detours—touch to remove any detours you
have entered for the route.
c  e r
reatinG and ditinG oUtes
2 miles in the
Route—if you are using an
EN-1