Call Waiting Or Call Waiting With Caller Id Service; Using Multiple Handsets; Voice Mail Service; Reset Vmwi - GE 30542EE1 User Manual

Telephone operation

Call waiting or call waiting with caller ID service

To use call waiting, you must subscribe to call waiting service from your telephone
service provider. This feature allows you to receive calls while you are already talking
on the phone. You will hear a call waiting alert tone when there is a second incoming
call. If you subscribe to both caller ID and call waiting with caller ID services, the
second caller's information is displayed after you hear the call waiting alert tone.
1. Press to answer the second incoming call.
2. Press to switch between calls.

Using multiple handsets

The system allows a maximum of two system handsets to have a conversation with
an outside call at a time. The call will not be ended until all system handsets hang up.
Press on another handset. Press
charger to end the call.

Voice mail service

The icon flashes on the screen of the handset(s) when you have received a new
voice mail message from your service provider.
IMPORTANT: Voice mail service is different from the answering system. In order to use the voice mail service,
you must subscribe to it from your telephone service provider.

Reset VMWI

You can reset the VMWI (voice message waiting indicator) when the phone indicates
new messages waiting but there are none (for example, if you have previously
accessed voice mail from a different telephone line while away from home). When
new voice mails do exist, your telephone service provider will continue to send the
signal to activate the feature.
1. Press .
2. Press or
3. Press or
4. Press again to select Yes to confirm.

Handset locator

You can locate a misplaced handset by paging it from the telephone base.
1. Press on the telephone base.
2. Press again on the telephone base or press
to select Base Setup and then press
to select Reset VMWI and then press
or place the handset in the telephone base or
on any handset to stop paging.
11
10:30
11/20
PM
Dialing Mode
.
Reset VMWI
.
11/20
10:30
PM
Yes
No