Phonebook; Add A Phonebook Record; Memory Location - GE 30542EE1 User Manual

Phonebook

Add a phonebook record

1. Press on the handset.
NOTE: You can also access the phonebook by pressing
2. Press once if your phonebook is empty, or press twice if your phonebook has
stored entries to select New Entry.
3. Enter the name (max. 16 characters). Press the key to the corresponding character
to display the correct letter. See the character table on page 18 for more
information.
4. Press .
5. Enter the number (max. 24 digits). If you need a pause between digits, press and
hold the until a P appears in the display. This will insert a 3-second pause in
the dialing sequence.
6. Press .
7. Press or
NOTE: The directory can store up to 50 entries with up to 24 digits for each telephone number and 14
characters for each name.

Memory location

You can program phone numbers into memory location buttons m1, m2 and m3 for
quick dialing.
To program a memory location:
1. Press and hold the desired memory location (m1, m2 or m3) button.
2. Enter the number (max. 24 digits). If you need a pause between digits, press and
hold the until a P appears in the display. This will insert a 3-second pause in
the dialing sequence.
3. Press to confirm.
NOTE: Numbers must be stored separately in each handset and base memory location.
To dial from a memory location:
Press the desired memory location button (m1, m2 or m3) when the handset is not in
use, the number will be dialed automatically.
-OR-
Press and then press the desired memory location button to dial.
to select the desired ringer tone, and then press
and selecting Phonebook.
17
.