Initial setting
Dialing mode
The default dialing mode is TONE for touch tone dialing. If you have pulse or rotary
service, you can change this setting to accommodate your telephone
line service.
1. Press
.
2. Press
or
3. Press
again to select Dialing Mode.
4. Press
or
to confirm.
Programming your area code (optional)
If you program your area code, the caller ID history displays only seven
digits of the telephone numbers from your area code.
1. Press
.
2. Press
or
3. Press
or
4. Enter your area code and then press
to select Base Setup and then press
to select the desired setting and then press
to select Handset Setup and then press
to select Area Code and then press
to confirm.
8
10:30
PM
Dialing Mode
Reset VMWI
.
10:30
PM
Tone
Pulse
10:30
PM
Area Code
Register HS
.
10:30
PM
.
Set Area Code
- - -
11/20
11/20
11/20
11/20