Number Of Rings Before The System Answers; Message Alert; Call Screening - GE 30542EE1 User Manual

Answering system

Number of rings before the system answers

You can select the number of rings before the answering system answers a call.
1. Press .
2. Press or
3. Press or
4. Press or
to confirm.
NOTE: If you select TOLL SAVER, the system answers after the second ring if there are new
messages, or after the fourth ring if there is no new message. This allows you to check your
system to see if there are new messages before incurring toll charges.

Message Alert

When this feature is activated and there are new messages, the telephone base
beeps every 15 seconds.
To turn this feature on or off:
1. Press .
2. Press or
3. Press or
4. Press or
press to confirm.

Call screening

When the answering system answers a call, you can listen at the telephone base
while the caller leaves a message.
The message automatically plays on the telephone base. Use the
to adjust speaker volume. If the speaker is at the lowest level (off), you will need to
increase the volume when listening to message playback at the telephone base. You
can also press
To turn this feature On or Off:
1. Press .
2. Press or
3. Press or
4. Press or
then press
to select Answer System and then press
to select Number of Rings and then press
to select the desired setting and then press
to select Answer System and then press
to select Message Alert and then press
to select Msg Alert On or Msg Alert Off and then
on a handset to listen to the recording.
to select Answer System and then press
to select Call Screening and then press
to select Screening On or Screening Off and
to confirm.
24
10:30 11/20
PM
.
Number of Rings
Announcement
.
10:30 11/20
PM
2 Rings
4 Rings
10:30 11/20
PM
Message Alert
.
Number of Rings
.
11/20
10:30
PM
Msg Alert On
Msg Alert Off
vol
vol
/ buttons
10:30 11/20
PM
Call Screening
Remote Code
.
.
10:30
11/20
PM
Screening On
Screening Off