Delete All Phonebook Entries; Phonebook Capacity; Direct Memory; Character Table - GE 30385EE1 User Manual

Phonebook

Delete all phonebook entries

1. Press when in idle mode.
2. Press / or use the scroll wheel to select the desired phonebook, then press the
Select softkey.
3. Press the Options softkey.
4. Press / or use the scroll wheel to select Delete All, then press the Select
softkey.
5. Press the Yes softkey to confirm.

Phonebook capacity

This feature allows you to check the remaining capacity of the phonebook.
1. Press when in idle mode.
2. Press / or use the scroll wheel to select the desired phonebook, then press the
Select softkey.
3. Press / or use the scroll wheel to select entry, then press the Options softkey.
4. Press / or use the scroll wheel to select PB Capacity, then press the Select
softkey. The screen then displays X/Y, where X indicates the number of entries
stored while Y indicates the capacity of the selected phonebook.
For example, 241/1500 means that there are 241 entries in a phonebook, which
has a maximum capacity of 1500 entries.

Direct memory

You can program 20 phone numbers into the memory location buttons 1-10 and
shift 1-10 in the telephone base for quick dialing.
To program a memory location:
1. Press the Menu softkey when the telephone base is in idle mode.
2. Press / or use the scroll wheel to select Direct Memory, then press the Select
softkey.
3. Press buttons 1-10 for locations 1-10, or press button shift followed by 1-10 for
locations 11-20.
4. Enter the number (max. 24 digits). If you need a pause between digits, press and
hold the until a P appears in the display. This will insert a 3-second pause in
the dialing sequence.
5. Press the Save softkey to confirm.
To dial from a memory location:
Press the desired memory location button on the telephone base, the number will be
dialed automatically using the speakerphone.
32
Phonebook
-OR-
1. Lift the corded handset, or press
2. Press the desired memory location button on the telephone base.
To edit/delete a memory location number:
1. Press the Menu softkey when the telephone base is in idle mode.
2. Press / or use the scroll wheel to select Direct Memory, then press the Select
softkey.
3. Press the desired memory location button (1-10 for locations 1-10, or shift
following by 1-10 for locations 11-20).
4. To edit the number, press
pad keys to enter the new number (max. 24 digits). If you need a pause between
digits, press and hold the until a P appears in the display. This will insert a
3-second pause in the dialing sequence.
-OR-
To delete the number, press and hold
screen.
5. Press the Save softkey to confirm.

Character table

Use the dial pad and the chart below to enter a name (up to 15 characters). Each
press of a particular key displays the character in the following order:
Dial pad Character by number of key presses
key
1 2 3
[1] space 1 #
[2] Aa Bb Cc
[3] Dd Ee Ff
[4] Gg Hh Ii
[5] Jj Kk Ll
[6] Mm Nn Oo
[7] Pp Qq Rr
[8] Tt Uu Vv
[9] Ww Xx Yy
[0] 0
NOTE: Press # to alternate between upper and lower case. Press * for special characters, *, ?, !, /, (, ), @.
or or .
to delete the existing numbers. Then use the dial
until all numbers erased on the
4 5 6
' , -
2
3
4
5
6
S 7
8
Zz 9
33
7 8
. &