Using the surface units—Knob-controlled models.
Throughout this manual, features and appearance may vary from your model.
At both OFF and HI the control clicks
into position. You may hear slight
clicking sounds during cooking,
indicating the control is maintaining
your desired setting.
Be sure you turn the control knob to
OFF when you finish cooking.
On.some.models .
On.some.models .
10
How to Set
Push.the.knob.in.and.turn.in.either.direction.to.
the.setting.you.want .
For glass cooktop surfaces:
A.HOT COOKTOP.indicator.light,.on.the.
cooktop,.will.glow.when.any.radiant.element.is.
turned.on . . It.will.remain.on.until.the.surface.is.
cooled.to.approximately.150°F .
Indicator light will:
.. C ome on when the unit is turned on or hot to
the touch.
.. S tay on even after the unit is turned off.
.. G low until the unit is cooled to approximately
150°F.
Dual and Triple Surface Units and Control Knobs
The surface unit has 2 or 3 cooking sizes to
select from so you can match the size of the unit
to the size of the cookware you are using.
Temperature Limiter
Every.radiant.surface.unit.has..
a.temperature.limiter . .
The.temperature.limiter.protects.the.glass.
cooktop.from.getting.too.hot . . It.is.normal.for.it.
to.cycle.when.the.cooktop.is.in.use .
(on some models)
Models.with.a.Triple.Surface.Unit.only .
Models.with.a.Triple.Surface.Unit.only .
The.temperature.limiter.may.cycle.the.units.off.
more.frequently.for.a.time.if:
The pan boils dry.
The pan bottom is not flat.
The pan is off-center.
There is no pan on the unit.
Need help?
Do you have a question about the Profile PB970SPSS and is the answer not in the manual?
Questions and answers