Cleaning Materials - Fujitsu ScanSnap S510 Operator's Manual

8.1

Cleaning Materials

Cleaning Materials
Cleaner F1
Lint-free dry cloth
ATTENTION
Note 1: To purchase cleaning materials, contact a FUJITSU scanner dealer where you purchased
the scanner.
Note 2: Any lint-free cloth can be used.
230
Parts No.
PA03950-0352
Commercially available. (*2)
•
Never use paint thinner and other organic solvents.
•
During the cleaning, prevent water or moisture from getting inside the scanner.
•
Do not use aerosol sprays to clean the scanner. Aerosol sprays cause dirt and
dust to enter the scanner, resulting in scanner failure and malfunction.
•
It may take long before the cleaner vaporizes if a large quantity is used. When
cleaning the scanner parts, dampen a cloth with modest quantities of the
cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to
leave no residue on the surface of the cleaned parts.
Remarks
1 bottle (100ml)
(*1)