Cleaning Materials - Fujitsu fi-7300NX Consumable Replacement And Cleaning Instructions

Fi-7300NX Daily Care and Consumable Replacement Guide
This section describes how to clean the scanner.

Do not use aerosol spray or spray that contains alcohol. Paper dust blown up by strong air from the spray
may enter inside the scanner which may cause the scanner to fail or malfunction.
Also note that sparks generated by static electricity may cause a fire.

The inside of the ADF becomes very hot when the scanner is being used. Before you start cleaning the inside
of the ADF, make sure to turn off the power, unplug the power cable and wait for at least 15 minutes for the
inside of the ADF to cool down.

Cleaning Materials

ATTENTION
In order to use the cleaning materials safely and correctly, read the precautions on each product thoroughly.