Fujitsu ScanSnap S510 Operator's Manual page 56

4. Press the [SCAN] button
⇒
The scanning is started.
HINT
ATTENTION
⇒
The power indicator (lamp)
The following window appears to indicate the scanning status.
⇒
When the scanning is complete, the ScanSnap Quick Menu appears.
36
•
By default, documents are scanned in "Duplex" mode when you press the
[SCAN] button. In the "ScanSnap Manager - Scan and Save Settings" dialog
box, you can switch the scanning mode of the [SCAN] button to "Simplex"
mode.
•
Scanning can also be started by using the ScanSnap Manager icon
the task bar.
For details about this operation, refer to "4.1 About the ScanSnap Icon" (page
64).
•
Do not connect or disconnect other USB devices during the scanning
operation.
•
Do not close the paper chute during the scanning operation.
•
Do not switch the user to log in during the scanning operation. Otherwise, the
scanning is canceled.
on the ScanSnap.
on the ScanSnap blinks blue during the scanning operation.
on
S
S