Satellite Link - Sylvania ZC320SL8 Owner's Manual

You can set the unit to start recording whenever it
detects the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
• Satellite link accepts only the connection from L1 (rear)
with the external tuner. (The connection from L2 cannot
read any signals from the external tuner.)
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/
video signals when it comes to the time you want to
finish recording. Refer to the tuner's manual on how to
set the timer.
• Make sure to set the satellite link standby mode when
you finish setting.
POWER POWER
ZOOM
.@/: ABC
GHI JKL
PQRS TUV
DISPLAY SPACE
TOP MENU MENU/LIST
REC SPEED REV
X1.3/0.8 SKIP
REC/OTR
DVD RECORDER

SATELLITE LINK

OPEN/CLOSE
TIMER TIMER
PROG. PROG.
DEF
INPUT SELECT
MNO AUDIO
WXYZ REPEAT
CLEAR SETUP SETUP
ENTER
RETURN ENTER
PLAY FWD
PAUSE SKIP
STOP CM SKIP
NB089
1
Press [SETUP].
2
Use [K / L] to select "Timer
Programming", then press [ENTER].
3
Use [K / L] to select "Satellite Link",
then press [ENTER].
Timer Programming
Timer Programming
Satellite Link
4
Use [K / L] to select the time and
recording speed, then press [ENTER].
Satellite Link
Start Speed
5:00PM
To Standby Mode
5
Use [K / L] to set the desired starting
time, then press [
• The hour can be selected from 1 to 12 with AM
or PM.
• Repeat procedures in step 5 to set the desired
minutes.
• If you wish to go back to the left, press [{].
6
Use [K / L] to select the recording
speed.
Refer to page 30 for details.
Instructions continue on the next page.
2H
].
B
EN 37