Preparing A Disc; Setting For Auto Chapter; Setting Aspect Ratio For Video Mode Recording - Sylvania ZC320SL8 Owner's Manual

Digital video disc recorder
Hide thumbs Also See for ZC320SL8:
Table of Contents

Advertisement

Setting for Auto Chapter

You can set a specified time for chapter marks.
1) Press [SETUP] and use [K / L] to select "General
Setting", then press [ENTER].
2) Use [K / L] to select "Recording", then press
[ENTER].
"Recording" menu will appear.
3) Use [K / L] to select "Auto Chapter", then press
[ENTER].
4) Use [K / L] to select a desired time option, then
press [ENTER].
General Setting
Playback
Display
Video
Auto Chapter
Recording
OFF
Clock
5 minutes
Reset All
10 minutes
15 minutes
30 minutes
60 minutes
5) Press [SETUP] to exit.
Note
• The interval for auto chapter marks may slightly
differ.
• A blank chapter may be created depending on the
remaining time of the disc.

PREPARING A DISC

Auto Chapter
Auto Finalize
Aspect Ratio (Video mode)
Make Recording Compatible
Setting Aspect Ratio for Video Mode
Recording
You can set the aspect ratio used for video mode
recording. The default setting of "Auto" is best for almost
all cases.
1) Press [SETUP] and use [K / L] to select "General
Setting", then press [ENTER].
2) Use [K / L] to select "Recording", then press
[ENTER].
"Recording" menu will appear.
3) Use [K / L] to select "Aspect Ratio (Video mode)",
then press [ENTER].
4) Use [K / L] to select your desired setting, then press
[ENTER].
General Setting
Playback
Display
Video
Aspect Ratio (Video mode)
Recording
Auto
Clock
4 : 3
Reset All
16 : 9
Auto (default):
This setting will produce the best DVD recording results
in almost all cases. All video input will record normally
as 4:3 video.
4:3:
This setting will also record ALL video input as 4:3
video, and is essentially the same as "Auto".
16:9:
This setting will record ALL video input as 16:9 video.
This setting is useful for recording "anamorphic" video,
such as from widescreen camcorders, and results in
true widescreen DVDs. Some knowledge and
experience is needed to use this setting correctly.
5) Press [SETUP] to exit.
Note
• For DVD-RW VR mode, the image will be recorded in
whichever the ratio that the program you record are
broadcasted with, regardless of the "Aspect Ratio
(Video mode)" setting.
Auto Chapter
Auto Finalize
Aspect Ratio (Video mode)
Make Recording Compatible
EN
25

Advertisement

Table of Contents
loading

Table of Contents