Sylvania ZC320SL8 Owner's Manual
  1. Manuals
  2. Brands
  3. Sylvania Manuals
  4. DVD Recorder
  5. ZC320SL8
  6. Owner's manual

Sylvania ZC320SL8 Owner's Manual

Digital video disc recorder
Hide thumbs Also See for ZC320SL8:
Table of Contents

Advertisement

Quick Links

Download this manual
Digital Video Disc Recorder
Owner's Manual
ZC320SL8
INSTRUCCIONES EN ESPAÑOL INCLUIDAS
THIS UNIT HAS NO TUNER SYSTEM, YOU MUST CONNECT TO EXTERNAL TUNER.
IF YOU NEED ADDITIONAL ASSISTANCE WITH SETUP OR OPERATING AFTER
READING OWNER'S MANUAL, PLEASE CALL TOLL FREE 1-800-968-3429, OR
VISIT OUR WEB SITE AT http://www.SylvaniaConsumerElectronics.com
© 2007 Funai Electric Co., Ltd.

Advertisement

Table of Contents
loading

Related Manuals for Sylvania ZC320SL8

Summary of Contents for Sylvania ZC320SL8

  • Page 1 THIS UNIT HAS NO TUNER SYSTEM, YOU MUST CONNECT TO EXTERNAL TUNER. IF YOU NEED ADDITIONAL ASSISTANCE WITH SETUP OR OPERATING AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-968-3429, OR VISIT OUR WEB SITE AT http://www.SylvaniaConsumerElectronics.com © 2007 Funai Electric Co., Ltd.
  • Page 2 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. e.g.) rear of your TV DIGITAL VIDEO DISC RECORDER ZC320SL8 RF coaxial cable VIDEO IN AUDIO IN TV signal ANT. IN...

  • Page 3: Dvd Recording

    Initial Setting Timer Recording – 2 You can program the unit to record up to 12 programs within a month in You need to follow these steps when you turn on this unit for the first time. advance. Daily or weekly program recordings are also available. Before recording, make sure Press [POWER].

  • Page 4: Precautions

    PRECAUTIONS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS WARNING: APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an CAUTION equilateral triangle, is intended to alert the user to the RISK OF ELECTRIC SHOCK presence of uninsulated “dangerous voltage”...

  • Page 5: Important Safeguards

    PRECAUTIONS Important Safeguards 1. Read Instructions - All the safety and operating 12. Power Cord Protection - Power supply cords should be instructions should be read before the appliance is routed so that they are not likely to be walked on or operated.
  • Page 6 PRECAUTIONS Installation Location Supplied Accessories For safety and optimum performance of this unit: remote control (NB089UD) with batteries (AAx2) • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV.
  • Page 7 Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners.

  • Page 8: Table Of Contents

    CONTENTS Introduction SPECIAL PLAYBACK ......46 Resume Playback ........46 PRECAUTIONS .

  • Page 9: Features

    FEATURES This unit not only plays back DVD and CD but also offers features for you to record on DVD and edit them after that. The following features are offered with this unit. Recording Editing This unit is compatible with recording on DVD-RW which is Deleting titles: recordable repeatedly and DVD-R which accept the addi- You can delete titles which you do not need anymore.
  • Page 10 FEATURES Discs for Recording, Playing back Disc type DVD-RW DVD-R Logo Automatically Format Can be formatted in VR or video mode formatted in video mode Video Mode VR Mode Icon Maximum record 480 min (12cm) 480 min (12cm) 480 min (12cm) time 144 min (8cm) 144 min (8cm)
  • Page 11 FEATURES Discs for playing back Disc Type DVD-VIDEO CD-DA CD-RW CD-R Logo Icon Files for playing back Type of title JPEG Icon Media CD-RW/-R CD-RW/-R is a trademark of DVD Format/Logo Licensing Corporation. Color Systems DVD players with are capable of playing DVD-RW recorded in VR mode.

  • Page 12: Functional Overview

    FUNCTIONAL OVERVIEW Front Panel 5 6* 7 ( * ) The unit can also be turned on by pressing these buttons. 1. Disc tray 9. AUDIO input jacks (L2) Place a disc when the disc tray is opened. Use to connect external device with a RCA audio 2.

  • Page 13: Rear Panel

    FUNCTIONAL OVERVIEW Rear Panel VIDEO VIDEO COAXIAL AUDIO IN DIGITAL AUDIO OUTPUT COMPONENT S-VIDEO AUDIO OUT S-VIDEO (L1) VIDEO OUT PCM / BITSTREAM 1. VIDEO IN jack (L1) 7. AUDIO OUT jacks Use to connect external device with a RCA video Use to connect a TV monitor, AV receiver or other cable.

  • Page 14: Remote Control

    FUNCTIONAL OVERVIEW Remote Control Installing the Batteries in the Remote Control Using a Remote Control Install the batteries (AAx2) matching the polarity Keep in mind the following when using the remote control: indicated inside battery compartment of the remote • Make sure that there are no obstacles between the remote control.
  • Page 15 FUNCTIONAL OVERVIEW ( * ) The unit can also be turned on by pressing these buttons. 1. TIMER PROG. button 18. CLEAR button Press to display the timer programming list. Press to clear the password once entered, to cancel 2. ZOOM button the programming for CD, to clear the selecting mark- During playback, press to enlarge the picture on the er number in the display menu, etc.

  • Page 16: Front Panel Display

    FUNCTIONAL OVERVIEW Front Panel Display BS CS 3. Current status of the unit 4. Displays the following : Appears in the afternoon • Elapsed playback time : Appears when playback is with the clock display. paused. • Current title / chapter / track / file number 2.

  • Page 17: Connection To An External Tuner

    CONNECTION TO AN EXTERNAL TUNER This section describes how to connect this unit to an external tuner such as cable/satellite box. rear of your TV • When you change the connections, all devices should be turned off. VHF / UHF antenna •...

  • Page 18: Settings For The Video Input

    SETTINGS FOR THE VIDEO INPUT You must let the unit know which video input jack you are using before making a recording. Press [SETUP]. POWER OPEN/CLOSE Use [K / L] to select “General TIMER ZOOM PROG. Setting”, then press [ENTER]. .@/: INPUT SELECT Use [K / L] to select “Video”, then...

  • Page 19: Connection To A Tv

    CONNECTION TO A TV Make one of the following connections, depending on the capabilities of your display device. Method 1 Method 2 Method 3 analog audio standard picture good picture better picture VIDEO COMPONENT rear of your TV S-VIDEO IN VIDEO IN (Green) AUDIO IN...

  • Page 20: Connection To An Audio System

    CONNECTION TO AN AUDIO SYSTEM 2 Channel Analog Audio Connection Digital Audio Connection stereo system Dolby Digital decoder AUDIO IN audio COAXIAL digital audio analog audio coaxial input jack input jacks digital audio coaxial cable RCA audio cable VIDEO VIDEO VIDEO VIDEO this unit...

  • Page 21: Guide To On-Screen Displays And Menus

    GUIDE TO ON-SCREEN DISPLAYS AND MENUS This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen displays give you the information on the loaded disc, the disc/file in playback, etc. The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference. On-Screen Display / Menu The on-screen display changes in the following order Disc Information / Menu...

  • Page 22: Main Menu

    GUIDE TO ON-SCREEN DISPLAYS AND MENUS Main Menu Press [SETUP] to display the main menu. Then use 1. General Setting: [K / L] to select a menu and press [ENTER] to display the To go to general setting menu. menu. These menus provide entries to all main functions 2.

  • Page 23: Initial Setting

    INITIAL SETTING You need to follow these steps when you turn on this unit Press [POWER]. for the first time. Turn on the TV. Select the input to which the unit is connected. Use [K / L] to select your desired language, then press [ENTER] to set POWER POWER...

  • Page 24: Setting The Clock

    SETTING THE CLOCK Set the clock before you try the timer programming. Clock Setting Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. OPEN/CLOSE POWER TIMER ZOOM PROG. Use [K / L] to select “Clock”, then .@/: .@/: INPUT SELECT...

  • Page 25: Formatting A Disc

    FORMATTING A DISC Choosing the Recording Format of a Brand-New DVD-RW Press [SETUP]. When inserting a brand-new DVD-RW, the unit automatically starts to initialize the disc. DVD-RW will be formatted either video or VR mode according to the recording format mode setting of the Use [K / L] to select “DVD Menu”, unit.

  • Page 26: Reformatting A Disc Manually

    FORMATTING A DISC Reformatting a Disc Manually Insert a recordable disc. If you are using a DVD-RW, you can format the disc by performing “Format”. You can format DVD-RW for either Press [SETUP]. video mode recording or VR mode recording. Use [K / L] to select “DVD Menu”, then press [ENTER].

  • Page 27: Preparing A Disc

    PREPARING A DISC Setting for Auto Chapter Setting Aspect Ratio for Video Mode Recording You can set a specified time for chapter marks. 1) Press [SETUP] and use [K / L] to select “General You can set the aspect ratio used for video mode Setting”, then press [ENTER].

  • Page 28: Setting A Disc To Protect

    SETTING A DISC TO PROTECT Press [SETUP]. To prevent accidental recording, editing or erasing the titles, you can protect them from “DVD Menu”. Use [K / ] to select “DVD Menu”, then press [ENTER]. POWER OPEN/CLOSE TIMER ZOOM PROG. Use [K / L] to select “Disc Protect .@/: INPUT SELECT OFF ON”, then press [ENTER].

  • Page 29: Playing The Discs In Other Dvd Players

    PLAYING THE DISCS IN OTHER DVD PLAYERS Auto Finalizing Press [SETUP] and use [K / L] to select “General Setting”, then press You can finalize discs automatically using this function. You can use this function to finalize discs after finishing [ENTER].

  • Page 30: Finalizing A Disc

    PLAYING THE DISCS IN OTHER DVD PLAYERS Finalizing a Disc You will need to finalize discs to play back on other DVD Press [SETUP]. players. Finalizing may take several minutes up to an hour. Since the process of the finalization fills empty space of the disc, a shorter recording period on the disc will require a longer time period for finalization.
  • Page 31 PLAYING THE DISCS IN OTHER DVD PLAYERS To cancel finalizing... Note (DVD-RW only) • Finalizing a disc in video mode automatically creates Press [STOP C] during the finalizing is in progress. Use a DVD menu. [K / L] to select “Yes”, then press [ENTER]. Finalizing is •...

  • Page 32: Information On Dvd Recording

    INFORMATION ON DVD RECORDING Recording Speed Restrictions on Recording You can select a recording speed among 5 options, and You cannot record copy-protected video using this unit. the recording time will depend on the recording speed Copy-protected video includes DVD-videos and some you select as follows.

  • Page 33: Basic Recording & One-Touch Timer Recording

    BASIC RECORDING & ONE-TOUCH TIMER RECORDING Follow the steps to record TV programs from an external tuner. Press [POWER]. This unit has no tuner system so cannot receive TV Turn on the TV and be sure to select the input to broadcasts without external tuner or such devices.
  • Page 34 BASIC RECORDING & ONE-TOUCH TIMER RECORDING Press [REC/OTR] to start recording. Press [STOP C] to stop recording. “I” will be displayed for 5 seconds. The recorded title will be included in the title list. (Refer to “Guide to a Title List” on page 55.) Wait for a moment.

  • Page 35: Timer Recording

    TIMER RECORDING You can program the unit to record up to 12 programs Guide to Timer Programming Display within a month in advance. Daily or weekly program recordings are also available. Before recording, make sure Timer Programming • Connect the external tuner to either L1 or L2 and set it JAN/ 2/07 12:00 AM L1 SP 2H (1:00) MON JAN/01 10:00AM...
  • Page 36 TIMER RECORDING Use [K / L / { / B] or [the Number Press [ENTER] when all items are buttons] to enter the start and end entered. time, then press [B]. Your program setting will be stored. • To set another program, repeat steps 2 to 7. Date Start •...
  • Page 37 TIMER RECORDING Checking, canceling, or correcting the timer If the timer program did not complete correctly, programming information the error number appears in the timer pro- gramming list. 1) Press [POWER]. will disappear on the front panel display. Timer Programming 2) Press [TIMER PROG.].

  • Page 38: Hints For Timer Recording

    TIMER RECORDING Hints for Timer Recording • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost. • If a disc is not inserted, flashes and timer recording cannot be performed.

  • Page 39: Satellite Link

    SATELLITE LINK You can set the unit to start recording whenever it detects the video signal from the external tuner. Press [SETUP]. Preparing for the satellite link timer recording: Preparation on the tuner • Satellite link accepts only the connection from L1 (rear) with the external tuner.
  • Page 40 SATELLITE LINK Press [ENTER]. “To Standby Mode” is highlighted. Press [ENTER] again. Satellite Link Start Speed 5:00PM To Standby Mode In a second, the unit will be turned off automatically as it goes into the satellite link standby mode. To cancel the satellite link function while in the satellite link standby mode: Press [POWER] to turn on the unit.

  • Page 41: Settings For An External Device

    SETTINGS FOR AN EXTERNAL DEVICE Connection to an External Device Connect the external device properly to either L2 (front) or L1 (rear) input jacks of this unit by using S-video or RCA audio / video cables. S-VIDEO VIDEO AUDIO OUT VIDEO AUDIO OUT S-VIDEO...

  • Page 42: Recording From An External Device

    SETTINGS FOR AN EXTERNAL DEVICE Recording from an External Device Before recording from an external device, refer to the instructions for the connection on page 39. Turn on the TV and press [POWER], and be sure to select the input of the TV to which the unit is connected.

  • Page 43: Information On Playback

    INFORMATION ON PLAYBACK Structure of Disc Contents The contents of DVD are generally divided into titles, and the titles are subdivided into chapters. Audio CDs are divided into tracks. Data disc contains MP3/JPEG are divided into folders, and the folders are subdivided into files. DVD video Title: Divided contents of a DVD video disc.Roughly...

  • Page 44: Basic Playback

    BASIC PLAYBACK Direct Playback Press [POWER]. Turn on the TV and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A] to open the POWER POWER OPEN/CLOSE OPEN/CLOSE TIMER ZOOM PROG. disc tray and insert your disc with its label facing up.

  • Page 45: Playback From The Title List

    BASIC PLAYBACK Playback from the Title List Press [POWER]. Turn on the TV and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A] to open the disc tray and insert your disc with its OPEN/CLOSE POWER POWER...

  • Page 46: Playing Back An Audio Cd And A Cd-Rw/-R With Mp3 / Jpeg Files

    BASIC PLAYBACK Playing Back an Audio CD and a CD-RW/-R with MP3 / JPEG Files Follow steps 1 to 2 in “Direct Playback” on page 42. Press [OPEN/CLOSE A] to close the POWER OPEN/CLOSE OPEN/CLOSE TIMER disc tray. ZOOM PROG. It may take awhile to load .@/: .@/:...

  • Page 47: Using The Title / Disc Menu

    BASIC PLAYBACK Playing Back an Audio CD and a CD- Using the Title / Disc Menu RW/-R with MP3 JPEG Files (cont’d) Kodak Picture CD DVD may contain a title list, which describes the contents The Picture CD is a service to convert photographs taken of the disc, or a disc menu, which guides you through the by a conventional film camera into digital data and write available functions in the disc.

  • Page 48: Special Playback

    SPECIAL PLAYBACK Skipping TV Commercials During Resume Playback Playback You can play back from where you stopped playing back the disc last. 1) During playback, press [STOP C]. You can skip TV commercials to enjoy the recorded The resume message will appear. programs without interrupting.

  • Page 49: Rapid Playback

    SPECIAL PLAYBACK Rapid Playback Slow Forward / Slow Reverse Playback 1) During playback, press [PAUSE F]. Then press Rapid playback function is available only during [FWD D] or [REV E]. playback. Every time you press [FWD D] or [REV E], This function is available only on discs recorded in the approximate speed will be changed as follows.

  • Page 50: Zoom

    SPECIAL PLAYBACK Zoom Marker Setting 1) During playback, press [DISPLAY]. This feature allows you to assign a specific point on a disc to be called back later. 2) Use [{ / B] to select , then press [ENTER] within 1) During playback, press [DISPLAY]. 1 second, or wait for 1 second to display the selection menu.

  • Page 51: Search

    SEARCH Title/Chapter Search Track Search Using [SKIP j ] / [SKIP i ] Using [SKIP ] / [SKIP 1) During playback, press [SKIP i] to skip the 1) During playback, press [SKIP i ] to skip the current track/file and move to the next. current title or chapter and move to the next.

  • Page 52: Time Search

    SEARCH Time Search 1) During playback, press [DISPLAY]. 2) Use [{ / B] to select , then press [ENTER]. e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video e.g.) audio CD 1/ 5 0:00:15 / 0:05:00 The number next to will be highlighted.

  • Page 53: Slide Show

    REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW Repeat Playback Note • Point B for the repeat A-B playback should be set Available repeat function may vary depending the discs. within the same chapter or track of point A. 1) During playback press [DISPLAY], then proceed to •...

  • Page 54: Program Playback

    REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW Program Playback Slide Show You can program the disc to play back in your desired You can select the display time between 5 seconds and order. 10 seconds. 1) Press [SETUP] in stop mode. 1) Follow steps 1 and 2 in “Program Playback” on the left.

  • Page 55: Selecting The Format Of Audio And Video

    SELECTING THE FORMAT OF AUDIO AND VIDEO You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Switching Subtitles Switching Audio Soundtrack DVD-video may have subtitles in one or more languages. When playing back a DVD-video recorded with 2 or more Available subtitle languages can be found on the disc soundtracks (these are often in different languages), you...

  • Page 56: Switching Virtual Surround System

    SELECTING THE FORMAT OF AUDIO AND VIDEO Switching Virtual Surround System Switching Camera Angles Some DVD-video have scenes shot from 2 or more You can enjoy stereophonic virtual space through your angles. Angle information should be on the disc case if existing 2 channel stereo system.

  • Page 57: Information On Disc Editing

    INFORMATION ON DISC EDITING Guide to a Title List Editing Discs Title list allows you to check the titles recorded on the Edit the recorded disc disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. You will find editing discs is easy.

  • Page 58: Deleting Titles

    DELETING TITLES Notes for deleting titles After the disc is fully recorded: DVD-RW DVD-R • When a title is deleted from • When the last title is deleted from • When a title is deleted from DVD-RW in VR mode, the DVD-RW in video mode, the recordable DVD-R, the recordable space recordable disc space will...
  • Page 59 DELETING TITLES You can delete titles which you do not need anymore. Please be advised that the titles once deleted cannot be In stop mode, press [TOP MENU]. brought back to the disc. Title list, original or playlist will appear. Be sure to read “Notes for deleting titles”...

  • Page 60: Creating/Deleting Playlist

    CREATING/DELETING PLAYLIST Adding Titles to a Playlist Follow the step 1 in “DELETING Playlist TITLES” on page 57 to display the For VR mode DVD-RW, you can create the playlist as you wish. original. You can add up to 99 titles to a playlist (as long as the total number of the playlist does not exceed 999 chapters).

  • Page 61: Erasing All Playlist

    CREATING/DELETING PLAYLIST Erasing All Playlist Playlist Press [SETUP]. A playlist can be deleted if it is no longer needed. Main menu will appear. Use [K / L] to select “DVD Menu”, OPEN/CLOSE then press [ENTER]. POWER TIMER ZOOM PROG. .@/: INPUT SELECT Use [K / L] to select “Delete All Playlists”, then press [ENTER].

  • Page 62: Editing Discs

    EDITING DISCS Putting Names on Titles You can put a name on the disc and change it from this menu. Use [K / L] to select “Edit Title Name”, then press [ENTER]. POWER OPEN/CLOSE Edit TIMER ZOOM PROG. Scene Delete Edit Title Name .@/: Chapter Mark...
  • Page 63 EDITING DISCS Putting Names on Titles (cont’d) Guide to Edit Title Name 1) Use [K / L] to select a desired character set, then press [ENTER]. POWER OPEN/CLOSE 2) Follow the list below, use [the Number buttons] TIMER ZOOM PROG. repeatedly until the desired letter appears.

  • Page 64: Setting Or Clearing Chapter Marks

    EDITING DISCS Setting or Clearing Chapter Marks Follow steps 1 to 3 in “Putting Names Original Playlist on Titles” on page 60 to display “Edit” You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. menu.

  • Page 65: Deleting A Part Of A Title

    EDITING DISCS Deleting a Part of a Title Original Playlist Use [SKIP H / G], You can delete a specific part of a title. [REV E], [FWD D], [PLAY B] and Even when parts of title are deleted from the playlist, the [PAUSE F] to find the start point, original title will remain as it is.
  • Page 66 EDITING DISCS Deleting a Part of a Title (cont’d) Use [K / L] to select “Delete” then press [ENTER]. Edit - Scene Delete Start Preview Delete JAN/ 1/07 12:00AM L1 LP 1 : 40 : 00 Use [K / L] to select “Yes” then press [ENTER].

  • Page 67: Dividing A Title

    EDITING DISCS Dividing a Title In stop mode, press [TOP MENU]. Playlist • For VR mode DVD-RW, press [MENU/LIST] to You can divide one title into 2 new titles. select “Playlist”. Use [K / L/ s / B] to select a desired title, then press [ENTER].

  • Page 68: Combining Titles

    EDITING DISCS Combining Titles Follow the steps 1 to 3 in “Dividing a Playlist Title” on page 65 to display “Edit” You can combine 2 titles into a single title. menu. Use [K / L] to select “Title Combining”, then press [ENTER]. OPEN/CLOSE POWER TIMER...

  • Page 69: Setting Or Releasing The Title Protection

    EDITING DISCS Setting or Releasing the Title Protection Follow the steps 1 to 3 in “Putting Original Names on Titles” on page 60 to To prevent the accidental editing, or erasing of the titles, display “Edit” menu. you can protect them in “Edit” menu. You can cancel the title protection feature after it is applied.

  • Page 70: Setting Or Clearing All Chapter Marks At Once

    EDITING DISCS Setting or Clearing All Chapter Marks at Once Follow the steps 1 to 3 in “Putting For titles in video mode DVD-RW, you can set or edit Names on Titles” on page 60 to chapter at every time interval. You can clear the chapter display “Edit”...

  • Page 71: List Of Settings

    LIST OF SETTINGS The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. Setup Items (highlight is the default) Contents Playback Parental Lock Set the parental level for DVD playback. →...
  • Page 72 LIST OF SETTINGS Setup Items (highlight is the default) Contents Video Progressive Set to the progressive scan mode (set to "ON") or to → page 78 the interlace scan mode(set to "OFF"). TV Aspect Set a picture size according to aspect ratio of your TV. 4:3 Letter Box →...

  • Page 73: Setups

    SETUPS Playback Press [STOP C] if you are playing back a disc. Press [SETUP] and use [K / L] to select “General Setting“, then press [ENTER]. OPEN/CLOSE POWER OPEN/CLOSE TIMER ZOOM PROG. Use [K / L] to select “Playback”, then press [ENTER].
  • Page 74 SETUPS Playback (cont’d) Parental Lock (Default: All) A password has not been set yet. Some DVD-video feature a parental lock level. Playback Use [K / L] to select “Yes”, then press [ENTER]. Use will stop if the ratings exceed the levels you set, it will [the Number buttons] to enter a new password except require you to enter a password before the disc will for 4737, then press [ENTER].
  • Page 75 SETUPS Playback (cont’d) Audio Out Dolby Digital (Default : Stream) Choose the appropriate audio setting for your external device. Use [K / L] to select a setting, then press [ENTER]. It will only affect a disc playback. General Setting Use [K / L] to select a desired item, then press [ENTER]. Playback Display Parental Lock...
  • Page 76 SETUPS Playback (cont’d) Subtitle Language (Default : OFF) Angle Icon (Default : ON) Set the subtitle language. Set to “ON” to show the angle icon during the playback. Use [K / L] to select a language, then press [ENTER]. Use [K / L] to select a setting, then press [ENTER]. General Setting General Setting Playback...

  • Page 77: Display

    SETUPS Display Press [STOP C] if you are playing back a disc. Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. OPEN/CLOSE POWER TIMER ZOOM PROG. Use [K / L] to select “Display”, then press [ENTER]. .@/: INPUT SELECT AUDIO...
  • Page 78 SETUPS Display (cont’d) OSD Language (Default : English) Set the language for the on-screen display. Use [K / L] to select a setting, then press [ENTER]. General Setting Playback Display OSD Language Screen Saver Video OSD Language Recording FL Dimmer English Clock Français...

  • Page 79: Video

    SETUPS Video Press [STOP C] if you are playing back a disc. Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. OPEN/CLOSE POWER TIMER ZOOM PROG. Use [K / L] to select “Video”, then press [ENTER]. .@/: INPUT SELECT AUDIO...
  • Page 80 SETUPS Video (cont’d) Progressive (Default : OFF) TV Aspect (Default: 4:3 Letter Box) This unit is compatible with the progressive scan system. You should select the TV aspect ratio to match the TV that The feature provides you with the higher definition you are connecting to the unit.

  • Page 81: Reset All

    SETUPS Reset All Reset the setting to default. Press [SETUP] in stop mode and use [K / L] to select “General Setting”, then press [ENTER]. Use [K / L] to select “Reset All”, then OPEN/CLOSE POWER press [ENTER]. TIMER ZOOM PROG.

  • Page 82: Troubleshooting

    TROUBLESHOOTING Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom Remedy Power The power does not turn on.
  • Page 83 TROUBLESHOOTING Symptom Remedy Playback The disc does not play back. • No disc is inserted. • A blank disc is inserted. • The disc is upside down. Insert the disc with the labeled side facing up. • The disc is not correctly inserted. •...
  • Page 84 TROUBLESHOOTING Symptom Remedy Others The unit does not operate • When static electricity, etc., causes the unit to operate abnormally, unplug properly. the unit and then plug it in again. The disc tray does not open when • It may take a few seconds for the disc tray to open after you have recorded or you press [OPEN/CLOSE A].
  • Page 85 TROUBLESHOOTING Error message Cause Solution Disc Error • Unplayable disc is inserted in the unit. • Insert the standardized disc which have — Please eject the disc. — • The disc is upside down. the marks on pages 8-9. Playback feature may not be available on this disc. •...

  • Page 86: Frequently Asked Questions

    TROUBLESHOOTING Frequently Asked Questions – Can I record to CD-RW/-R? No, this unit records only DVD. – Can I play back DVD-video that is bought in another Possible when the region code of the disc is 1 and All. country? –...

  • Page 87: Language Code

    LANGUAGE CODE Language Code Language Code Language Code Abkhazian 4748 Hungarian 5467 Russian 6467 Afar 4747 Icelandic 5565 Samoan 6559 Afrikaans 4752 Indonesian 5560 Sangho 6553 Albanian 6563 Interlingua 5547 Sanskrit 6547 Amharic 4759 Interlingue 5551 Scots Gaelic 5350 Arabic 4764 Inupiak 5557...

  • Page 88: Glossary

    GLOSSARY Analog Audio PCM (pulse code modulation) An electrical signal that directly represents sound. The most common system of encoding digital audio, Compare this to digital audio which can be an electrical found on CD and DAT. Excellent quality, but requires a signal, but is an indirect representation of sound.

  • Page 89: Specifications

    SPECIFICATIONS • This model complies with the below specifications. • Designs and specifications are subject to change without notice. • This model may not be compatible with features and/or specifications that may be added in the future. General System DVD-RW/-R, DVD-video, CD-DA, CD-RW/-R Power requirements 120V AC +/-10%, 60Hz +/-5% Power consumption...

  • Page 90: Español

    ESPAÑOL Discos grabables y reproducibles Tipo de disco DVD-RW DVD-R Logotipo Puede formatearse en modo VR o modo de Formateado Formato video automáticamente en modo de video Modo de video Modo VR 480 minutos 480 minutos 480 minutos Tiempo máximo de (12 centímetros) (12 centímetros) (12 centímetros)
  • Page 91 ESPAÑOL Conexión a un Sintonizador Externo 1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA. 2) Efectúe la conexión como se ilustra abajo. parte trasera de su televisor ej.) cable coaxial de RF VIDEO IN AUDIO IN señal de TV ANT.
  • Page 92 ESPAÑOL Grabación Básica Configuración Inicial Cuando usted encienda este aparato por primera vez Presione [OPEN/CLOSE A] para abrir la necesita seguir estos pasos. bandeja de discos e insertar su disco con el rótulo aupntando hacia arriba. Presione [POWER]. * Este aparato puede grabar a DVD-RW y DVD-R.
  • Page 93 ESPAÑOL Grabación con Temporizador Usted puede programar el equipo para que grabe hasta 12 Presione [TIMER PROG.]. programas, con un mes de anticipación. También hay disponibles grabaciones de programas diarias o semanales. Antes de grabar, asegúrese de que • Cuando llegue el momento en que desea empezar a Utilice [K / L] para seleccionar “Prog.

  • Page 94: Limited Warranty

    LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.

Table of Contents