Chapter 2
Installing and Starting Up the Switch
Installing the Switch on a Wall
Attaching the Brackets to the Switch
78-6456-04
This section describes the steps required to attach the switch to a wall:
•
Attaching the brackets to the switch
Attaching the switch to a wall
•
Use two of the supplied number-8 Phillips flat-head screws to attach the long side
of the bracket to the switch.
Figure 2-8 shows how to attach the brackets to one side of the switch. Follow the
same steps to attach the second bracket to the opposite side.
Figure 2-8
Attaching Brackets for Wall-Mounting
For vertical wall-mounting
flat-head
Catalyst 3500 Series XL Hardware Installation Guide
Installing the Switch on a Wall
Phillips
screws
2-15