Gigastack Port; Console Port - Cisco WS-C3524-PWR-XL-EN Installation Manual

Appendix B Connector and Cable Specifications

Gigastack Port

Caution

Console Port

78-6456-04
The GigaStack Gigabit Interface Converter (GBIC) uses proprietary connectors,
as shown in Figure B-3.
Figure B-3 GigaStack Connector
The GigaStack GBIC cables are proprietary, high-data-rate cables with enhanced
signal integrity and EMI performance.
Do not use standard IEEE 1394 cables with the GigaStack GBIC.
The console port uses an 8-pin RJ-45 connector, described in
Table B-2. The supplied RJ-45-to-RJ-45 rollover cable and DB-9 adapter are used
to connect the console port of the switch to a console PC. You need to provide a
RJ-45-to-DB-25 female DTE adapter if you want to connect the switch console
port to a terminal. You can order a kit (part number ACS-DSBUASYN=)
containing that adapter from Cisco. For console port and adapter pinout
information, see Table B-1 and Table B-2.
Catalyst 3500 Series XL Hardware Installation Guide
Connector Specifications
Table B-1 and
B-3