Table of Contents
Advertisement
Preface
This preface describes the purpose of the Cisco uBR7100 Series and Cisco uBR7100E Series Universal
Broadband Router Hardware Installation Guide, its intended audience, its organization, and its
document conventions. This preface also provides information on how to obtain related documentation
and defines some technical terms you need to understand when using this guide.
Purpose
This installation guide explains the initial hardware installation and basic configuration procedures for
Cisco uBR7100 series routers. It contains procedures for installing the router hardware, starting up the
router, and troubleshooting any problems that might occur during the installation. After completing the
installation and basic configuration procedures covered in this guide, you will then use the appropriate
companion publications to more completely configure your system. For a list of the companion
publications, see the
Unless otherwise indicated, the term Cisco uBR7100 series refers to all models of the Cisco uBR7100
Note
series universal broadband router, including the Cisco uBR7111, Cisco uBR7111E, Cisco uBR7114, and
Cisco uBR7114E routers.
Audience
To use this publication, you should be familiar not only with Cisco router hardware and cabling but also
with electronic circuitry and wiring practices. You should also have experience as an electronic or
electromechanical technician. Experience with RF cable plants is also highly desirable.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
OL-5916-01
"Related Documentation" section on page
Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide
8.
7
Advertisement
Table of Contents
Troubleshooting
