Chapter 6
Maintenance
The flash disk PC card must be installed with the back label facing up. The card is keyed and cannot be
Note
seated the wrong way.
Carefully guide the card into the slot until it mates with the slot's connector and the eject button for the
Step 4
slot pops out toward you. (See
Figure 6-4
Note
OL-5916-01
Figure
Inserting and Ejecting a Flash Disk Memory Card
Back label
(faces up)
a
Front label
(faces down)
b
c
Flash memory cards do not insert all the way into the PCMCIA slots; the end of the card
protrudes from the slot. Do not attempt to force the card past this point.
Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide
6-4.)
Slot 0
Slot 1
Flash Memory Card Usage
6-7