Acer Predator Connect X7 BE11000 User Manual page 5

• Open the Predator Connect Mobile App and follow the steps for registering an
account. Go to your email inbox, review the registration email, and input the
4-digit registration code onto the mobile App. When the whole process is completed,
you will be automatically signed in.
• Enable the mobile Wi-Fi function and scan the device QR-code printed on the back label.
The default admin and Wi-Fi password will be automatically exported into the mobile app.
(SSID: X7_YYYY)
• Device setup completed.
Set up the CPE via browser:
• Please make sure that the wireless function on your laptop is already enabled.
• Check the device's back label, find the CPE's default SSID (X7_YYYY_2.4GHz)
and password and then connect.
• Open the browser on your laptop/desktop, input the device web admin URL:
http://acer-connect.com
• The device will automatically redirect to a quick setup wizard. Follow the easy 1-2-3 steps
and get ready to access the internet.
Note: The admin login password requires changing within the setup wizard for first-
time use. Please create a strong password and keep it in a safe place. (The new
password cannot be the same as the prior one.)
Note: The CPE web admin portal will automatically lock after five consecutive
incorrect attempts. You have to power cycle the CPE to unlock the web admin.
Note: The SSID Wi-Fi password can't be the same as the admin login password.
Both the App & browser can help the CPE to do a quick setup. Web UI can execute
all functions and settings of the CPE. Mobile App allows the user to remotely control
some functions of the CPE and receive notifications.
or IP: http://192.168.76.1
5 5