SFP Transceiver Specifications
This appendix provides cabling specifications for the SFP transceivers supported on the Cisco ME 6500
Ethernet switch.
shows an SFP transceiver that uses Category 5, 5e, 6, or 6a copper network interface cable.
Each port must match the wavelength specifications on the other end of the cable. For reliable
Note
communications, the cable must not exceed the required cable length.
Figure B-1
Dust plug
Figure B-2
OL-8900-03
Figure B-1
shows an optical SFP transceiver with the major features labeled.
SFP Transceiver (Optical)
Receive optical bore
Transmit optical bore
Bail clasp
SFP Transceiver (GLC-T)
A P P E N D I X
Cisoc ME 6500 Series Ethernet Switch Installation Guide
B
Figure B-2
B-1