Cisco ME-C6524GS-8S Installation Manual page 19

Chapter 1 Product Overview
Table 1-1 Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S) Features (continued)
Feature
Power supplies
Pluggable transceivers supported
OL-8900-03
Description
Supports one or two power supplies. The following power supplies are
•
supported:
PWR-400W-DC (400 W DC-input power supply)
–
PWR-400W-AC (400 W AC-input power supply)
–
The 400 W AC-input power supply requires single-phase source AC.
Note
Source AC can be out of phase between multiple power supplies
because all AC power supply inputs are isolated.
Both the AC-input power supply and the DC-input power supply
Note
have status LEDs. Refer to Appendix A for descriptions of the LEDs
and their meanings.
The ME6524 switches support a combination of AC-input and
Note
DC-input power supplies in the same chassis.
The chassis supports SFP transceivers.
•
The 8 uplink ports support the following SFP transceiver types:
•
GLC-T—1000BASE-T
–
GLC-SX-MM—1000BASE-SX
–
GLC-LH-SM—1000BASE-LX/LH
–
GLC-ZX-SM—1000BASE-ZX
–
GLC-BX-D—1000BASE-BX10-D
–
– GLC-BX-U—1000BASE-BX10-U
– GLC-FE-100BX-D—100BASE-BX10-D
– GLC-FE-100BX-U—100BASE-BX10-U
CWDM-SFP-xxxx—CWDM SFP transceivers
–
DWDM-SFP-xxxx—DWDM SFP transceivers
–
The 24 downlink ports support the following SFP transceiver types:
•
GLC-T—1000BASE-T
–
GLC-SX-MM—1000BASE-SX
–
GLC-LH-SM—1000BASE-LX/LH
–
GLC-ZX-SM—1000BASE-ZX
–
GLC-BX-D—1000BASE-BX10-D
–
GLC-BX-U—1000BASE-BX10-U
–
– GLC-FE-100BX-D—100BASE-BX10-D
GLC-FE-100BX-U—100BASE-BX10-U
–
Note CWDM and DWDM SFP transceivers are not supported in the
downlink ports.
Note Refer to Appendix B for SFP transceiver cabling distances and
additional information.
Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S)
Cisco ME 6500 Series Ethernet Switch Installation Guide
1-3