Light Bulb Replacement; Cooktop Light; Oven Light - Danby Designer DMW162BL-OTR Owner's Manual

Light Bulb Replacement

Cooktop Light

Replace the
burned-out bulb
with a 40-watt
incandescent bulb.

Oven Light

Replace the
burned-out bulb
with a 40-watt
incandescent bulb.
1 To replace the bulb(s), first dis-
connect the power at the main
fuse or circuit breaker panel or
pull the plug.
2 Remove the screw at the side of
the light cover and lower the
cover.
1 To replace the oven light, first
disconnect the power at the main
fuse or circuit breaker panel or
pull the plug.
2 Remove the top grille by taking
out the 2 screws that hold it in
place.
32
3 Be sure the bulb(s) to be
replaced are cool before remov-
ing. After breaking the adhesive
seal, remove the bulb by gently
turning.
4 Replace the screw. Connect
electrical power to the oven.
3 Next, remove the screw located
above the door near the center of
the oven that secures the light
housing .
4 Replace the screw. Connect
electrical power to the oven.