If Something Goes Wrong; Before You Call For Service - Danby Designer DMW162BL-OTR Owner's Manual

Before You Call For Service

Problem
Oven will not start.
Floor of the oven is warm,
even when the oven has not
been used.
"LOCKED" appears
on display.
You hear and unusual, low-
tone beep

If Something Goes Wrong

Possible Cause
A fuse in your home may
be blown or the circuit
breaker tripped.
Power surge.
Plug not fully inserted into
wall outlet.
The cooktop light is located
below the oven floor. When
the light is on, the heat it
produces may make the
oven floor get warm.
The control has been locked.
You have tried to start the
Reminder without a valid
time of day.
You have tried to change
the power level when it
is not allowed.
35
What to do
Replace fuse or reset circuit breaker.
Unplug the microwave oven, then
plug it back in.
Make sure the 3-prong plug on the
oven is fully insered into wall outlet.
This is normal.
Press and hold STOP/CLEAR for
about 3 seconds to unlock
the control.
Start oven and enter a valid time
of day.
Many of the oven's features are
preset and cannot be changed.