Subscribe to Our Youtube Channel
Related Manuals for TIS TISEVTEST100
Summary of Contents for TIS TISEVTEST100
- Page 1 TEST1 User manual © Copyright TIS INSTRUMENTS 2021 Release EN 1.01 - 09/09/2021...
-
Page 2: Table Of Contents
TIS EV-TEST100 TABLE OF CONTENTS 1. PRECAUTIONS AND SAFETY MEASURES ..............2 2. GENERAL DESCRIPTION ....................3 3. PREPARATION FOR USE ....................3 3.1. Initial checks ........................3 3.2. Adapter power supply ......................3 3.3. Storage ..........................4 4. NOMENCLATURE ......................4 4.1. Description of the adapter .....................4 4.2. -
Page 3: Precautions And Safety Measures
1. PRECAUTIONS AND SAFETY MEASURES The adapter has been designed in compliance with IEC/EN61010-1 guidelines relevant to electronic measuring adapters. For your safety and in order to prevent damaging the adapter, please strictly follow the procedures described in this manual and read carefully all notes preceded by symbol . -
Page 4: General Description
TIS EV-TEST100 can be used in combination with the following TIS electrical safety tester in EVSE AUTO Sequence Mode, or other appropriate electrical safety testers in Manual Mode (please see §... -
Page 5: Storage
3.3. STORAGE In order to guarantee accurate measurement, after a long storage time, wait for the adapter to come back to normal condition (see § 7). 4. NOMENCLATURE 4.1. DESCRIPTION OF THE ADAPTER CAPTION: Input for connection to HT instrument via C100EV cable Terminals N, PE for connection to... -
Page 6: Function Description Of Pp State Selector
4.2. FUNCTION DESCRIPTION OF PP STATE SELECTOR Position Description EVSE disconnected EVSE connected with maximum current of 13A EVSE connected with maximum current of 20A EVSE connected with maximum current of 32A EVSE connected with maximum current of 63A 4.3. FUNCTION DESCRIPTION OF CP STATE SELECTOR Position Description Electric vehicle disconnected... -
Page 7: Operating Instructions
Fig. 1 - parts 2, 3 and 4) of the adapter respectively to B1, B3 and B4 inputs of the TIS MFT-PRO or TIS MFT-PRO+ multifunction testers by using the cables supplied together Connect the Type 2 plug cable (see Fig. - Page 8 Please note that our TIS1908 EVSE Test Report is available for the manual recording of tests Fig. 2: Use of the adapter for testing EVSE with MFT- PRO instrument...
-
Page 9: Efficiency Check Of Evse Energy Meter
➢ Set PP State to NC, set CP State to A and set Fault to OK ➢ Connect one lead from your continuity tester to the PE socket on the TIS EV-TEST100 and the other lead to an Earth Point on the circuit ➢... -
Page 10: Maintenance
➢ To check that the EVSE will cut power in the event of an Earth Fault, set the Fault into PE. You should be able to hear the EVSE turn off and there should be visual indication that power is off ➢... -
Page 11: End Of Life
This adapter complies with requirements of EMC 2014/30/EU directive This adapter complies with requirements of European Directive 2011/65/EU (RoHS) and 2012/19/EU (WEEE) 7.1. ACCESSORIES 7.1.1. Accessories provided • Cable for connection to TIS MFT-PRO tester Code C100EV • Carrying case • User manual 8. ASSISTANCE 8.1. -
Page 12: Assistance
The warranty shall not apply in the following cases: • Repair and/or replacement of accessories and battery (not covered by warranty). • Repairs that may become necessary as a consequence of an incorrect use of the adapter or due to its use together with non-compatible appliances. •... - Page 13 TEST INSTRUMENT SOLUTIONS LTD UNITS 12/14 LUDDITE WAY BUSINESS PARK, RAWFOLDS WAY, CLECKHEATON, BD19 5DQ (T): 01274 752407 (F): 01274 870175 Email: sales@tis-tic.co.uk Web: www.testinstrumentsolution.co.uk...
Need help?
Do you have a question about the TISEVTEST100 and is the answer not in the manual?
Questions and answers