M-wrg-s series;5016 series;5014 series.
home ventilation with heat recovery
.
for surface-mount and flush-mount installation
of m-wrg ventilation units (32 pages)
Summary of Contents for Meltem M-WRG-DB/2 DESIGNframe
Page 1
M-WRG series Part no. 5300-70-01 Week 08/2016 EN VE NT I LAT I O N T H E R IG HT W AY Meltem Wärmerückgewinnung GmbH & Co. KG Am Hartholz 4 · D-82239 Alling info@meltem.com · www.meltem.com...
Installation manual M-WRG-DB/2 DESIGNframe and M-WRG-DB/3 front panel V E N T I L AT I O N & H E AT R E C O V E R Y Contents Introduction ........................3 Notes on this installation manual ..................3 Description ........................
► Read section „2 Safety instructions“ on page 4 carefully. Description This manual describes how to install the M-WRG-DB/2 DESIGNframe and the M-WRG-DB/3 front panel for the M-WRG series ventilation units. Target group This installation manual is intended for users of the ventilation unit. They do not require any special prior knowledge.
— The ventilation unit must not be operated without a filter. — For any use contrary to the intended use, Meltem Wärmerückgewinnung GmbH & Co. KG shall accept no liability for any damage that may occur and offers no warranty that the components will work perfectly and correctly. VE NT I LAT I O N T H E R IG HT W AY Meltem Wärmerückgewinnung GmbH &...
Installation manual M-WRG-DB/2 DESIGNframe and M-WRG-DB/3 front panel V E N T I L AT I O N & H E AT R E C O V E R Y Items supplied DESIGNframe M-WRG-DB/2, part no. 5370-2 Fig. 1: M-WRG-DB/2 DESIGNframe M-WRG-DB/3 front panel, part no.
Installation manual M-WRG-DB/2 DESIGNframe and M-WRG-DB/3 front panel V E N T I L AT I O N & H E AT R E C O V E R Y Installing the M-WRG-DB/2 DESIGNframe Removing the cover from the ventilation unit ►...
Installation manual M-WRG-DB/2 DESIGNframe and M-WRG-DB/3 front panel V E N T I L AT I O N & H E AT R E C O V E R Y Attaching the DESIGNframe to the ventilation unit ► Hold the cover (item 1 in Fig. 5) of the...
Need help?
Do you have a question about the M-WRG-DB/2 DESIGNframe and is the answer not in the manual?
Questions and answers