Casio BE-300 User Manual page 57

3. After you are finished, tap
• This displays a screen for configuring the access point setup.
Access point setup screen
4. After you are finished, tap
• This displays a screen for configuring the modem you are using.
Modem setup screen
• The screens shown in steps 5 and 6 below do not appear if you selected An Internet
Application only in step 2 without selecting A Mail Application. In such a case, skip to
step 7 of this procedure.
.
Input the access point phone number, and your
connection ID and password as supplied to you by your
provider.
You can tap here to display a screen for configuring the
number of tries when dialing, security protocol, and IP
address. See "Configuring Advanced Dial-up Settings" on
page 60 for more information.
.
Tap here to display a list of supported modems.
Set the speed (data rate) in accordance with your access
point and modem speeds.
Normally you can leave these settings at their initial
defaults. Change them only if your provided specifically
tells you to do so.
57