Page 1
This Owner's Manual is provided and hosted by Appliance Factory Parts. FISHER PRICE J9562 Owner's Manual Shop genuine replacement parts for FISHER PRICE J9562 Find Your FISHER PRICE Ride On Parts - Select From 999 Models -------- Manual continues below --------...
Page 2
(both included). Requires three "AA" (LR6) alkaline alkaline batteries for simulated radio operation (not included). batteries for simulated radio operation (not included). batteries for simulated radio operation (not included). For Models J4390, J9561, J9562 For Models J4390, J9561, J9562 For Models J4390, J9561, J9562...
• Use this vehicle ONLY outdoors. Most interior flooring can be charge. To find the authorized service center nearest you, damaged by riding this vehicle indoors. Fisher-Price ® will not be please visit us on-line at www.powerwheels.com or call...
IMPORTANT INFORMATION ELECTRICAL HAZARD DANGER To prevent electric shock, do not immerse in water; wipe clean with a damp cloth. WARNING • Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. • PREVENT FIRE - Never modify the electrical system.
PARTS • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. •...
Page 6
PARTS Steering Wheel Steering Wheel Cap 12 Volt Battery 2 Bushings 4 Hubcaps 12 Volt Charger 2 Mirrors " x 1 " Pin - 1 " -16 Lock Nut - 2 2 Mirror Covers #8 x " Screw - 27 #8 x "...
BATTERY CHARGING ELECTRICAL HAZARD CAUTION WARNING Use the charger in dry locations only. • Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. About Thermal Fuses • PREVENT FIRE Your Power Wheels ® 12 volt battery is equipped with a built-in - Never modify the electrical system.
BATTERY CHARGING ASSEMBLY WARNING Children can be harmed by small parts, sharp edges and sharp points in the vehicle's unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle.
Page 10
ASSEMBLY Front Bumper Bushing Washer • Fit the front bumper to the vehicle. Front Axle • Slide a " washer onto a front axle. • Fit a bushing, flat side first, onto the front axle. Front Wheel Wheel Cover (Marked R) •...
ASSEMBLY Assembly Tool Lock Nut FRONT VIEW • Insert six #8 x " screws into the front bumper and tighten. • Fit a "-16 lock nut, rounded side out, onto the front axle. IMPORTANT! Tighten the lock nut firmly with the closed end of the assembly tool.
ASSEMBLY Dash Assembly Dash Connectors • Insert four #8 x " screws into the dash assembly and tighten. Motor Harness Connector • Position the motor harness connector toward the front of the vehicle. • Place the dash assembly upside down on top of the front end of the vehicle.
Page 13
ASSEMBLY Battery Compartment Door Battery Compartment Door Battery Compartment Door DASH VIEW • Locate the simulated radio on the dash. • Before applying the labels, wipe the surface of the vehicle with • Loosen two screws a clean, dry cloth to remove any dust or oils. on the underside of the dash to remove the simulated radio.
ASSEMBLY Short Seat Belts Hood Seat Long Seat Belt • Insert the fastener end of a short seat belt strap through the slot near the outer edge of the seat. Make sure the side of the seat belt with the fastener faces the outer edge of the seat. •...
Page 15
ASSEMBLY Steering Column BACK VIEW • Insert three black #8 x " screws into the back of the seat and tighten. • Wipe the steering column with a paper towel to remove any Note: You will need to remove these three screws if you change excess lubricant.
Page 16
ASSEMBLY Fastener Cap Press Wheel Lift Steering Column • Fit the fastener cap onto the end of the • While pressing down on the steering wheel, grasp the steering steering column. column under the dash and pull it up as far as it will go. •...
DECORATION • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. • Place the labels exactly as shown in the illustrations. For best results, avoid repositioning a label once it has been applied to the vehicle. •...
Page 18
DECORATION Label #17 on the opposite side Both sides BACK VIEW J4390pr-0922...
BATTERY INSTALLATION CHARGER INDICATOR IMPORTANT! Use only a Power Wheels ® 12 volt lead-acid rechargeable battery. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels ®...
BATTERY CARE AND DISPOSAL Care Disposal If a battery leak develops, avoid contact with the leaking acid • Your Power Wheels ® battery is a non-spillable, sealed lead-acid and place the damaged battery in a plastic bag. See information battery. It must be recycled or disposed of in an environmentally below for proper disposal.
SAFE DRIVING RULES Teach Safety Rules to Children RIDING HAZARD While children can quickly develop the skill necessary to drive this vehicle, it is important to remember that their judgment WARNING skills are still very immature. Unsupervised driving by children can lead to serious injury.
See the instructions on this page to remove the high speed lock-out screw. STOP IMPORTANT! Use this vehicle ONLY outdoors. Most interior floor-ing can be damaged by riding this vehicle indoors. Fisher-Price will not be responsible for damage to the ® floor if the vehicle is used indoors.
COOL LIGHTS AND VEHICLE CARE SOUND EFFECTS • Check all screws, cap nuts and their protective coverings regularly and tighten as required. Check plastic parts on a regular basis for cracks or broken pieces. • During snowy or rainy weather, the vehicle should be stored inside or under a protective cover.
PROBLEMS AND SOLUTIONS GUIDE IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still experience a problem, please contact Power Wheels ® Consumer Relations, toll-free at 1-800-348-0751 between 9 AM - 7 PM (EST) Monday through Friday or 11 AM - 5 PM (EST) Saturday.
Page 25
PROBLEMS AND SOLUTIONS GUIDE PROBLEM POSSIBLE CAUSE SOLUTION Short run time (Less than Undercharged battery Charge the battery. A new battery should have been charged for 1 - 3 hours per charge) at least 18 hours before using the vehicle for the fi rst time. After fi rst-time use, recharge the battery for at least 14 hours after each use.
Page 26
PROBLEMS AND SOLUTIONS GUIDE PROBLEM POSSIBLE CAUSE SOLUTION Vehicle runs in low speed, but High speed lock-out not disconnected. The vehicle was pre-set to run only in low speed. To allow the does not run in high speed. vehicle to run in low and high speed, you must disconnect the High Speed Lock-Out.
FCC STATEMENT ICES AND NMB STATEMENTS United States Only This equipment has been tested and found to comply with the limits ICES-003 for a Class B digital device, pursuant to Part 15 of the FCC Rules. • This Class B digital apparatus complies with Canadian ICES-003. These limits are designed to provide reasonable protection against •...
LIMITED WARRANTY Bumper-to-Bumper* Limited Warranty *One year limited warranty from the date of purchase on the Power Wheels ® vehicle. Six month limited warranty on the 12 volt battery. For the original purchaser, this one year limited warranty covers the Power Wheels ®...
Need help?
Do you have a question about the J9562 and is the answer not in the manual?
Questions and answers