Summary of Contents for Fisher-Price POWER WHEELS Jep Lil WRANGLER 4x4
Page 1
This Owner's Manual is provided and hosted by Appliance Factory Parts. FISHER PRICE J0713 Owner's Manual Shop genuine replacement parts for FISHER PRICE J0713 Find Your FISHER PRICE Ride On Parts - Select From 999 Models -------- Manual continues below --------...
400 authorized service centers nationwide. Our authorized • Use this vehicle ONLY outdoors. Most interior flooring can be damaged service centers will repair or replace parts under warranty at no extra by riding this vehicle indoors. Fisher-Price will not be responsible for ®...
WARNINGS AND CAUTIONS WARNINGS AND CAUTIONS ELECTRICAL HAZARD WARNING • Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system.
PARTS PARTS • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. •...
Page 6
PARTS PARTS Fasteners Shown Actual Size #8 x 1" Screw - 12 6 Volt Charger 6 Volt Battery #8 x 18 x 1" Screw - 2 Shifter Microphone #6 x " Screw - 11 Steering Wheel Cap Key Assembly #6 x 1 "...
PARTS PICTURE PARTS PICTURE Note: Some of the parts shown are assembled to both sides of the vehicle. Vehicle Body Headlight Lens - 2 Windshield Instrument Panel #6 x " Screw - 11 Steering Column Steering Wheel Cap Windshield Frame Steering Wheel - Bottom Half #6 x 1 "...
BATTERY CHARGING ELECTRICAL HAZARD ELECTRICAL HAZARD WARNING CAUTION Use the charger in dry locations only. • Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. About Thermal Fuses • PREVENT FIRE Your Power Wheels 6 volt battery is equipped with a built-in thermal ®...
Page 9
BATTERY CHARGING Charger Connector Battery Connector • Squeeze the connector tabs on the charger connector and plug it into the battery connector. IMPORTANT! If you are recharging your battery, you will first need to • Plug the charger into a standard wall outlet. lift the hood and remove the battery retainer (pretend engine cover).
ASSEMBLY WARNING Steering Column Children can be harmed by small parts, sharp edges and sharp points in the vehicle's unassembled state, or by electrical Guide items. Care should be taken in unpacking Steering and assembly of the vehicle. Children should Linkage not handle parts, including the battery, or INSET...
Page 11
ASSEMBLY Steering Wheel Cap Slot Steering Wheel Radio Dial Activity Panel Label 12 Gear Label 13 • Using safety scissors, separate the activity panel and the instrument panel. Dispose of the plastic connector. • Apply labels 12 and 13 to the radio dial. •...
Page 12
ASSEMBLY Hole Microphone Slot Assembly Instrument Panel Plastic • Insert and “snap” the key assembly into the hole in the instrument panel. Instrument Panel • Bend the plastic tip at the end of the microphone cord to form a “T”. •...
Page 13
ASSEMBLY Windshield Windshield Frame Windshield • Rotate the top of the windshield toward the front of the vehicle body. • Fit the windshield into the windshield frame. • Insert four #8 x 1" screws into the holes in the hinge on the windshield •...
Page 14
ASSEMBLY Grille Screw Tips Sport Bar Cover (RON) Sport Bar Headlight Lens • Align the tips of the screws with the holes in the other sport bar cover marked RON. Fit the two sport bar covers together. • Fit the tab on one side of a headlight lens into the notch in the grille. •...
Page 15
ASSEMBLY Traction Band Ridge Tether Wheel Cap Assembly • Face the back of the vehicle. • With the cap tether pointing down, insert and “snap” the cap assembly into the square opening in the rear of the vehicle. BOTTOM VIEW Taillight Lens •...
DECORATION Proper label application will help to keep the labels looking their best! Keep the following guidelines in mind when applying labels: • Wash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils.
BATTERY INSTALLATION AND BATTERY RETAINER (ENGINE COVER) ASSEMBLY IMPORTANT! Use only a Power Wheels ® Type H 6 Volt battery. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels ®...
BATTERY CARE AND DISPOSAL Disposal Care If a battery leak develops, avoid contact with the leaking acid and • Your Power Wheels ® battery is a non-spillable sealed lead-acid battery. place the damaged battery in a plastic bag. See information below for It must be recycled or disposed of in an environmentally sound manner.
SAFE DRIVING RULES RIDING HAZARD WARNING Prevent Injuries and Deaths • Direct Adult Supervision Required • Never Ride at Night Use vehicle on generally level ground ONLY! • Keep Children Within Safe Riding Areas These areas must be: - away from swimming pools and other 10.
• Check all screws, retainers and protective coverings regularly and IMPORTANT! Use this vehicle ONLY outdoors. Most interior tighten as required. Check plastic parts on a regular basis for cracks flooring can be damaged by riding this vehicle indoors. Fisher-Price ® or broken pieces.
BUMPER-TO-BUMPER LIMITED WARRANTY *One year limited warranty from the date of purchase on the Power Wheels ® vehicle. Six month limited warranty on 6 volt battery. For the original purchaser, this one year limited warranty covers the Power Wheels ® ride-on vehicle (purchased from Power Wheels ®...
PROBLEMS AND SOLUTIONS GUIDE IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still experience a problem, please contact Power Wheels ® Consumer Relations, toll-free at 1-800-348-0751 between 8 AM and 6 PM (EST) Monday through Friday.
Page 23
PROBLEMS AND SOLUTIONS GUIDE PROBLEM POSSIBLE CAUSE SOLUTION Vehicle was running but Tripped thermal fuse The built-in thermal fuse may "trip" and shut down operation suddenly stopped (cont.) of the vehicle if the vehicle is overloaded or the driving conditions too severe. The fuse will automatically reset itself after approximately 25 seconds, allowing the vehicle to resume normal operation.
Page 24
PROBLEMS AND SOLUTIONS GUIDE PROBLEM POSSIBLE CAUSE SOLUTION Vehicle runs sluggishly (cont.) Vehicle is overloaded Make sure you do not overload the vehicle by allowing more than one rider at one time, exceeding the 50 lb. maximum weight capacity, or by towing objects behind the vehicle.
Need help?
Do you have a question about the POWER WHEELS Jep Lil WRANGLER 4x4 and is the answer not in the manual?
Questions and answers