Adjusting The Cutting Height - Flymo MICROCOMPACT 300 Manual

5
K
The Micro Compact uses an advanced belt drive system,
between the motor and the blade which improves cutting
power and flotation in all conditions. Due to the high turning
force (T orque) which this motor develops, a light squeak
may be heard when the machine is started, this is quite nor-
mal and will not effect the performance of the product.
Remember
Note
L
MAXIMUM
3
• If the blade is cracked or damaged replace it with
a new one.
• Never use a blade bolt if the insulated head is
damaged cracked or missing.
(M)
Starting and Stopping cont...
How to Mow

Adjusting the Cutting Height

Fitting the Blade and Fan
(M)
Figure M
• NOTE: There are two start/stop levers fitted. Either
one can be used for starting the lawnmower.
• IMPORTANT: Do not use the start/stop levers
intermittently
To Stop your Lawnmower
Do Not Overload Your Mower:
Always handle the blade with care - sharp edges
could cause injury. USE GLOVES. Never use more
than 3 Cutting Height Spacers. Spacers must only
be fitted between the blade and the fan and NEVER
between the blade and the bolt.
Removing the Blade and Fan.
For a Lower Cut
For a Higher Cut
Removing the Blade and Fan
• Renew your metal blade after 50 hours mowing or
2 years whichever is the sooner - regardless of
condition.
M
(M)
(M)
(J)
(K)
(H)
Fitting the Blade and Fan.
(M)
(L)