Extreme Networks Summit 300-24 Hardware Installation Manual page 373

WARNING!
XENPAK modules become very hot after prolonged use. Take care when removing a XENPAK from
the chassis. If the module is too hot to touch, disengage the module and allow it to cool before
removing it completely.
3 Holding both captive screws, pull the XENPAK module out of the card.
4 Place the dust covers back into the XENPAK module connectors.
5 Place the XENPAK module immediately into an antistatic container to protect it from ESD damage
and dust.
6 If you are not installing another XENPAK module, cover the opening with a cover plate.
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
Removing a XENPAK Module
373