Projector Control - Epson PowerLite Pro Z8000WUNL Brochure & Specs

Projector Control

This utility allows users to control one projector at a time through the LAN network. Projector Control
is used in the room in which the projector is located, taking the place of the remote control for some
basic commands, including power on and off, volume control, source changes and others.
EasyMP Network Projection (Z8050WNL only)
®
EasyMP Network Projection is a client-based content-over-IP utility which is
installed on a wireless or wired laptop (Mac
display content to any networked Epson EasyMP projectors from any IP
network, using the EasyMP feature. This can be achieved through an
existing network infrastructure.
EasyMP Network Projection
Use EasyMP Network Projection to send display
content to any Epson projector that features EasyMP.
® or PC). It allows users to send
Message Broadcasting ( Z8050WNL only)
Customize images/alerts over the network for announcements or instructions.
Protocols
ESCVP21.net
ESCVP21.net is a set of published and programmable IP codes that allow
users to control and monitor networked Epson projectors via the LAN.
ESCVP21
ESCVP21 is a set of published and programmable serial codes that allow
users to control and monitor Epson projectors via a USB or RS-232
connection utilizing this ASCII-based protocol.
Low Cost of Ownership 25