Epson PowerLite 1915 Network Manual page 93

Troubleshooting
Check
Is Standby Mode set to Network On?
Did a fatal abnormality occur and the projector come to a
sudden stop?
Is power being supplied to the projector?
Is the network cable connected correctly?
For Wired LAN
To use the Mail Notification function when the projector is in standby, set Network On in Standby
Mode from the Configuration Menu.s See your projector User's Guide.
When the projector comes to a sudden stop, mail cannot be sent.
If, after checking the projector, the abnormal status continues, contact Epson. s See your projector
User's Guide.
Check that there has not been a local power failure or that the circuit breaker for the electrical outlet
of the projector has not been tripped.
Check that the network cable is connected correctly. Reconnect it if it is not connected or not
connected properly.
Remedy
93