Epson PowerLite 1915 Network Manual page 89

Troubleshooting
Error Messages
The selected projector is busy. Do you want to continue
the connection process?
EasyMP Network Projection initialization failed.
Connection failed due to keyword mismatch.
Network adapter information could not be obtained.
One or more connected projectors do not support
resolutions greater than SXGA. Reduce the screen
resolution and reconnect.
One or more projectors are not responding.
You tried to connect to a projector that is connected to another computer.
When Yes is clicked, it connects to the projector. The connection between the projector and the other
computer is cut off.
When No is clicked, it does not connect to the projector.
The connection between the projector and the other computer is maintained.
Restart EasyMP Network Projection. If the message still appears, uninstall and then reinstall EasyMP
Network Projection.
p.13
s
When connecting to a projector for which a Projector keyword has been set, the wrong Projector
keyword is entered.
Check the Projector keyword that is displayed on the projector's connection standby screen. After the
connection is disconnected and then reconnected, enter the Projector keyword on the keyword entry
screen that is displayed.
p.20
s
Check the following point.
Is a network adapter installed on the computer?
Is the driver for the network adapter used installed on the computer?
After checking, restart the computer and connect again.
If you still cannot connect, check the following.
Check the network settings on the computer and the network settings on the projector.
For details on the network settings to be made on the projector, see s See your projector User's
Guide.
A connected Epson projector does not support the selected computer screen resolution. Change the
computer screen resolution to SXGA (1280x1024) or less.
You cannot connect to multiple projectors simultaneously. Check the network settings on the
computer and the network settings on the projector.
For details on the network settings to be made on the projector, see s See your projector User's
Guide.
Remedy
89