Registering A Ca Certificate - Epson PowerLite 1915 Network Manual

Registering a Digital Certificate to the Projector
E
When information on the certificate is displayed, check that
the content is correct, and then position the cursor over "OK"
and press the Enter button.
When the message "Digital certificate imported." is displayed,
registration is complete.

Registering a CA Certificate

Procedure
A
Connect the USB storage device on which the Digital
certificate is stored to the projector and start PC Free.
The file list screen is displayed.
B
Press the [ ][
control to position the cursor over the CA certificate (CER
file) icon and press the Esc button.
C
Select "CA certificate" from the menu displayed, then press
the Enter button.
][ ][ ] buttons on the remote
D
When information on the certificate is displayed, check that
the content is correct, and then position the cursor over "OK"
and press the Enter button.
When the message "CA certificate obtained. Restart." is displayed,
registration is complete. Press the Enter button, to turn off the pro-
jector. After you press the [t] button to restart the projector, the
certificate is authenticated. If authentication is successful, the IP
address is displayed.
82