Interfaces
Parallel interface
Use the IEEE 1284-I compliant parallel interface connector.
Using ECP mode
To use ECP mode with a parallel (IEEE 1284 level I compliant)
interface connector, your computer must support ECP mode.
The procedure of the mode setting on the parallel interface may
differ depending on your computer. Refer to your computer's
manual to adjust the mode setting on the parallel interface.
USB interface
USB 1.1
Note:
Only computers equipped with a USB connector and running Mac OS
8.1 to 9.X or Windows Me, 98, XP, or 2000 support the USB interface.
Ethernet interface
You can use an IEEE 802.3 100BASE-TX/10BASE-T
straight-through shielded, twisted-pair interface cable with the
RJ45 connector.
322
Technical Specifications