Note:
You should only use labels designed for laser printers or
plain-paper copiers.
To prevent the label adhesive from coming into contact with
printer parts, always use labels that completely cover the
backing sheet, with no gaps between the individual labels.
Press a sheet of paper on top of each sheet of labels. If the paper
sticks, do not use those labels in your printer.
You may have to make the setting Thick for Paper Type in the
Setup Menu.
Thick paper
The following table shows important settings you have to make
when using Thick.
Paper Source
MP Tray Size setting in the Tray
Menu
Printer driver settings
Loading a custom paper size
You can load non-standard size paper into the MP tray as long as
it meets the following size and weight requirements:
Plain paper
MP tray only (up to 50 sheets)
(Select appropriate size)
Paper Size: (Select appropriate size)
Paper Source: MP tray
Paper Type: Thick
92 × 210 mm to 216 × 297 mm
(3.6 × 8.3 in. to 8.5 × 11.7 in.)
(Weight: 60 to 90g/m²)
Paper Handling
2
2
2
2
2
2
2
2
2
2
2
2
47