Printing with the Duplex Unit
Duplex printing with the optional Duplex Unit prints on both
sides of the paper. When printing for binding, the binding edge
can be specified as required to produce the desired page order.
E
As an
NERGY
the double-sided printing function. Refer to
Compliance for more information on the
program.
To use Printing for Binding, the optional Duplex Unit must be
installed and enabled in the printer driver. To enable the Duplex
Unit, select the AL-C1900 icon and close Chooser. However, the
Duplex Unit is enabled automatically when this unit is installed
and the printer is connected with the computer correctly.
1. Click the
Layout dialog box appears.
2. Select the Duplex check box.
3. Select a Binding position from Left, Top, or Right.
4. Click Duplex Settings to open the Duplex Settings dialog box.
®
S
TAR
partner, EPSON recommends the use of
Layout icon on the Basic Settings dialog box. The
Using the Printer Software with Macintosh
E
S
NERGY
E
S
NERGY
TAR
4
4
®
4
TAR
®
4
4
4
4
4
4
4
4
4
125