Danby Simplicity SPAC8499 Owner's Manual page 18

Key Pad Functions Fig. 5
The control panel on this unit "illuminates"
automatically when any key pad is depressed. This
"illumination" feature will "self-deactivate" (turn-off)
automatically approx. 30 seconds after the last key
pad is depressed.
I/O: Power Switch On / Off.
MODE Indicator Lights: Illuminate under the
different mode settings Fig. 6;
COOL Mode:
DRY (Dehumidifier) Mode:
HEAT Mode:
Water Full
FAN Mode:
Green Light: Remains on while compressor is
operating. Green light turns off when desired
temperature is achieved. Applicable to both Air
Conditioner and Dehumidifier.
Red Light: Remains on while heater is
operating. Red light turns off when desired temperature
is achieved.
Water Full Indicator Light: Flashes red when
the water level of the water tank exceeds the maximum
set level or if the water tank is not correctly positioned in
the cabinet. Fig. 7.
FAN: Selects Low-Medium-High fan speeds.
Fan Options:
Cooling (3 speeds) Low-Medium-High
Heating (2 speeds) Low-High
Dry - Dehumidifying (1 speed) Medium.
Fan (3 speeds) Low-Medium-High
Temp/Clock Adjustments:
: Used to adjust (forward) Time of Day Clock settings (1
min. increments).
Used to adjust (forward) Temperature settings (1°C
increments).
Used to adjust (forward) Temperature settings (2°F
increments).
Used to adjust (forward) Auto-Timer settings
(10 min. increments)
: Used to adjust (backward) Time of Day Clock settings
(1 min. increments).
Used to adjust (backward) Temperature settings (1°C
increments).
Used to adjust (backward) Temperature settings (2°F
increments).
Used to adjust (backward) Auto-Timer settings (10 min.
increments)
SWING: Allows the vertical louver grills to oscillate
back and forth automatically (70° Swing).
CLOCK: Allows you to initiate and/or change the
TIME OF DAY setting.
TIMER ON: Used to initiate the AUTO ON start time
program, in conjuction with the
TIMER OFF: Used to initiate the AUTO OFF stop
time program, in conjuction with the
pads.
Green Light
Green Light
Red Light
No indicator light
°C
°F
°C
°F
NOTE: This appliance provides a feature that will allow you the
option of setting "temperatures" in "Celsius" or "Fahrenheit".
To change the temperature display on the main unit, press the
(Temp/Clock) "
to alternate between the˚C & ˚F scale
Celisus scale allows adjustments in 1˚C increments.
Farenheight scale allows adjustments in 2˚F increments.
8
MODE
I/O
ON
FAN
TIMER
SWING OFF
Green light while cooling.
Red light while heating.
Green light while dehumidifying.
Cool/Heat/Dry
A warning signal of 8 beeps will sound and
the Water Full indicator will flash every
0.5 seconds.
Water Full
Temperature Conversion Chart
10 11 12 13 14
50 52 54 55 57
22 23 24 25 26
72 73 75 77 79
" keypad & "Clock" keypad "simultaneously"
& key pads.
& key
TEMP./CLOCK
ADJ.
CLOCK
15 16 17 18 19 20 21
59 61 63 64 66 68 70
27 28 29 30 31 32 33
81 82 84 86 88 90 91
Fig. 5
Fig. 6
Fig. 7