Package Contents; Important Safety Precautions; Installation Precautions - Boss Audio Systems ELITE BE10ACP.X User Manual

Introduction
This camera is designed for use as a front view or rear-facing backup
camera, and mounted neatly behind your license plate. When installed
with any of our camera-capable head units, the camera view can be
automatically triggered when shifting into reverse or manually triggered by
selecting the camera button from the head unit home screen.

Package Contents

• 1x Camera with power and video sockets
• 1x Power cable with power plug
• 1x Video cable with two yellow RCA plugs
• User manual
Important
Please read and understand all instructions before you use your product.
Failure to follow the instructions could result in injury and/or damage that
could potentially void the warranty.

Important safety precautions

• Use of the camera must not replace other safe driving habits. Precise
control and looking around before backing up is necessary.
• Always remember that the area displayed by the camera is limited, and
certain obstacles may not be detected or not reliably detected.

Installation precautions

• WARNING: Always consult a professional installer.
• Improper wiring and mounting of the camera can cause damage, injury
or accident. Have installation performed by a professional only. Contact
our technical support for any installation questions.
• Disconnect the negative terminal of the vehicle battery prior to wiring.
• When making modifications to your car due to the installation, make
sure the safety and structural integrity of the car is not impaired.
• Hide wires under car floor mat or through car headliner. Make sure
wires are not squeezed or damaged by sharp edges. Use rubber
bushings for penetrations.
1