Sound Settings; Set Sound Effects; Sound Mode And Equalizer Setting; Volume Balance Setting - Boss Audio Systems ELITE BE10ACP.X User Manual

Sound Settings

Set Sound Effects

From the home menu, touch [SETTINGS] >
[Audio] > [EQ] to access sound settings.

Sound Mode and Equalizer Setting

To select a preset sound mode (Jazz, HipHop,
Pop, Rock or R&B), touch or .
To customize equalizer setting, touch
until [Custom] appears then swipe up or down
each frequency bar to adjust decibel output.

Volume Balance Setting

Touch or to adjust front and rear volume
balance until the sound has a satisfying depth.
Touch or to adjust right and left volume
balance until you are pleased with the sound
and a suitable balance is found.

Crossover Frequency Setting

[HIGH PASS]: Adjust High Pass Filter (HPF)
or for main audio (radio and media play). Only
the frequencies above the one you set will be
received to reproduce sound.
[LOW PASS]: Adjust Low Pass Filter (LPF) for
main audio (radio and media play). Only the
frequencies below the one you set will be
received to reproduce sound.
[HPF SLOPE]: Set a high pass filter slope in
decibels. An HPF slope determines the rate that
attenuates the frequencies below the set one.
[LPF SLOPE]: Set a low pass filter slope in
decibels. A LPF slope determines the rate that
attenuates the frequencies above the set one.
[SUB Filter]: Adjust the cutoff frequency for the
subwoofer. Only the frequencies below the one
you set will be received to reproduce sound.
[SUB Level]: Adjust volume output for the
subwoofer.

Time Alignment Setting

Adjust sound delay time so that sound
from all the speakers arrives at the listener
simultaneously.
1. Touch a preset button for settings as a
listening position. Total three presets can be
stored as different listening positions.
2.
Touch or to set delay time for front and
rear speakers, and touch or
subwoofer.
Experiment with different time values to find
the optimal settings for you.
To clear the set values, touch [RESET].
for the
21