Figure 7. Ip Setup - Asus GigaX2124X User Manual

GigaX Series L2 Managed Switch User's Guide
Default User Name:
Default Password:
3. To setup a new IP address, click "System", then "IP Setup" (see Figure
8). Fill in the IP address, network mask and default gateway, then click
.
4. If your new address is different from the default, the browser can not
update the switch status window or retrieve any page. This is normal.
You have to retype the new IP address in the address/location box, and
press <Enter>. The WEB link returns.
5. To enable authentication for Web access, click "Administration" on
the menu list, then select "Enabled" to start the protection.
A login window appears immediately after you click
figures on the next page.
24
Admin
(no password)
You can change the password at any time (see section
5.3.1 System Commands).
Figure 7. IP Setup
. See the