Dial-In User; Figure 34. Port Access Control - Asus GigaX2124X User Manual

•
Multi-host: If enabled, all hosts connected to the selected port are allowed
to use the port if one of the hosts passed the authentication. If disabled,
only one host among other hosts passed the authentication is allowed to
use the port.
•
Authentication Control: If 'force authorized' is selected, the selected port is
forced to be authorized. Thus, traffic from all hosts is allowed to pass.
Otherwise, if 'force unauthorized' is selected, the selected port is blocked
and no traffic can go through. If 'Auto' is selected, the behavior of the
selected port is controlled by 802.1x protocol. All ports should be set to
'Auto' under normal conditions.
•
Guest VLAN: Specify a guest VLAN to clients that are not 802.1x-capable.
Click
to refresh the settings to current value.
4.7.2

Dial-In User

Dial-in User is used to define users in the local database of the switch.
GigaX Series L2 Managed Switch User Guide
to make the settings effective permanently. Click

Figure 34. Port Access Control

59