Table of Contents
Advertisement
TRENDnet User's Guide
•
Device monitoring using the Internal System Log, External Syslog, E-mail Alert,
and SNMPv1/2c
•
Local/Remote management via Web browser, upgrade firmware, and
backup/restore configuration
*The number of supported concurrent VPN tunnels is dependent upon available bandwidth.
Product Hardware Features
Rear Panel View
© Copyright 2012 TRENDnet. All Rights Reserved.
•
LAN Ports – Connect Ethernet cables (also called network cables) from your
router LAN ports and to your wired network devices.
•
WAN Port - Connect an Ethernet cable (also called network cable) from your
router WAN port and to your xDSL/Cable modem.
•
Power Port – Connect the included power adapter from your router power
port and to an available power outlet.
Note: Use only the adapter that came with your router.
•
On/Off Power Switch – Push your router On/Off push button power switch to
turn your router "On" (Inner position) or "Off" (Outer position).
TW100-BRV214
2
Advertisement
Table of Contents
